Tritium-permeation-barrier properties of erbium oxide (TPB) coating on CLAM steel

Shuai Liu; Xin Ju; Jie Qiu; Guoxiang Chen; Jun Sun; Yong Xin; Fei Ma

doi:10.1016/j.fusengdes.2018.12.022

Tritium-permeation-barrier properties of erbium oxide (TPB) coating on CLAM steel

Shuai Liu
, Xin Ju
, Jie Qiu
, Guoxiang Chen
, Jun Sun
, Yong Xin
, Fei Ma

材料科学与工程学院

Xi'an Shiyou University
University of Science and Technology Beijing
Nuclear Power Institute of China

科研成果: 期刊稿件 › 文章 › 同行评审

10 引用（Scopus）

摘要

Erbium oxide (Er₂O₃) coatings are considered as the candidate for tritium permeation barrier (TPB) because of its low permeation reduced ratio. The enhanced adhesion between TPB layer and metal substrate is one of the key issues for the high reliability. In this work, erbium coatings were firstly prepared by radio frequency (RF) magnetron sputtering and then annealed to generate Er₂O₃ TPB coatings, accompanied with Er₂Fe₁₇ due to inter-diffusion between Er and steel substrates. The coatings are compact and smooth if the annealing temperature is above 873 K. The samples are insulator at room temperature, and meet the requirement of TPB in blanket. The adhesion of coatings could be improved with elevating annealing temperature. According to the AES profile, a thickness controllable TPB multi-layered model of Er₂O₃/Er₂O₃+Er/Er/Er₂Fe₁₇/Fe is proposed.

源语言	英语
页（从-至）	347-351
页数	5
期刊	Fusion Engineering and Design
卷	138
DOI	https://doi.org/10.1016/j.fusengdes.2018.12.022
出版状态	已出版 - 1月 2019

访问文件

10.1016/j.fusengdes.2018.12.022

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{388ac7e4bb364fccb6b1b719e9df28d7,

title = "Tritium-permeation-barrier properties of erbium oxide (TPB) coating on CLAM steel",

abstract = "Erbium oxide (Er2O3) coatings are considered as the candidate for tritium permeation barrier (TPB) because of its low permeation reduced ratio. The enhanced adhesion between TPB layer and metal substrate is one of the key issues for the high reliability. In this work, erbium coatings were firstly prepared by radio frequency (RF) magnetron sputtering and then annealed to generate Er2O3 TPB coatings, accompanied with Er2Fe17 due to inter-diffusion between Er and steel substrates. The coatings are compact and smooth if the annealing temperature is above 873 K. The samples are insulator at room temperature, and meet the requirement of TPB in blanket. The adhesion of coatings could be improved with elevating annealing temperature. According to the AES profile, a thickness controllable TPB multi-layered model of Er2O3/Er2O3+Er/Er/Er2Fe17/Fe is proposed.",

keywords = "Erbium oxide, Magnetron sputtering, Multilayer coating, Tritium permeation barriers",

author = "Shuai Liu and Xin Ju and Jie Qiu and Guoxiang Chen and Jun Sun and Yong Xin and Fei Ma",

note = "Publisher Copyright: {\textcopyright} 2018",

year = "2019",

month = jan,

doi = "10.1016/j.fusengdes.2018.12.022",

language = "英语",

volume = "138",

pages = "347--351",

journal = "Fusion Engineering and Design",

issn = "0920-3796",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Tritium-permeation-barrier properties of erbium oxide (TPB) coating on CLAM steel

AU - Liu, Shuai

AU - Ju, Xin

AU - Qiu, Jie

AU - Chen, Guoxiang

AU - Sun, Jun

AU - Xin, Yong

AU - Ma, Fei

PY - 2019/1

Y1 - 2019/1

N2 - Erbium oxide (Er2O3) coatings are considered as the candidate for tritium permeation barrier (TPB) because of its low permeation reduced ratio. The enhanced adhesion between TPB layer and metal substrate is one of the key issues for the high reliability. In this work, erbium coatings were firstly prepared by radio frequency (RF) magnetron sputtering and then annealed to generate Er2O3 TPB coatings, accompanied with Er2Fe17 due to inter-diffusion between Er and steel substrates. The coatings are compact and smooth if the annealing temperature is above 873 K. The samples are insulator at room temperature, and meet the requirement of TPB in blanket. The adhesion of coatings could be improved with elevating annealing temperature. According to the AES profile, a thickness controllable TPB multi-layered model of Er2O3/Er2O3+Er/Er/Er2Fe17/Fe is proposed.

AB - Erbium oxide (Er2O3) coatings are considered as the candidate for tritium permeation barrier (TPB) because of its low permeation reduced ratio. The enhanced adhesion between TPB layer and metal substrate is one of the key issues for the high reliability. In this work, erbium coatings were firstly prepared by radio frequency (RF) magnetron sputtering and then annealed to generate Er2O3 TPB coatings, accompanied with Er2Fe17 due to inter-diffusion between Er and steel substrates. The coatings are compact and smooth if the annealing temperature is above 873 K. The samples are insulator at room temperature, and meet the requirement of TPB in blanket. The adhesion of coatings could be improved with elevating annealing temperature. According to the AES profile, a thickness controllable TPB multi-layered model of Er2O3/Er2O3+Er/Er/Er2Fe17/Fe is proposed.

KW - Erbium oxide

KW - Magnetron sputtering

KW - Multilayer coating

KW - Tritium permeation barriers

UR - https://www.scopus.com/pages/publications/85058477589

U2 - 10.1016/j.fusengdes.2018.12.022

DO - 10.1016/j.fusengdes.2018.12.022

M3 - 文章

AN - SCOPUS:85058477589

SN - 0920-3796

VL - 138

SP - 347

EP - 351

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

ER -

Tritium-permeation-barrier properties of erbium oxide (TPB) coating on CLAM steel

摘要

访问文件

其它文件与链接

学术指纹

引用此