TY - JOUR
T1 - Three-dimensional numerical investigation of flow and heat transfer performances of novel straight microchannel heat sinks
AU - Yuan, Jin
AU - Qu, Yongfeng
AU - Deng, Ningkang
AU - Du, Liang
AU - Hu, Wenbo
AU - Zhang, Xiaofan
AU - Wu, Shengli
AU - Wang, Hongxing
N1 - Publisher Copyright:
© 2023 Elsevier B.V.
PY - 2023/12
Y1 - 2023/12
N2 - Four-type novel single crystal diamond (SCD) straight microchannel heat sinks with different shapes (symmetrically inclined, turned symmetrically inclined, V-shaped, and X-shaped) are designed and investigated by the three-dimensional computational fluid dynamics method. These four-type microchannel heat sinks are evaluated in terms of fluid flow and heat transfer capabilities compared to the conventional rectangular straight microchannel (RSMC) heat sink. Our research indicates that the newly designed novel SCD microchannel heat sinks can enhance the heat dissipation effect in comparison to the conventional RSMC heat sink, thereby substantiating its potential for enhancing thermal management in electronic devices. Each V-shaped and X-shaped straight microchannel heat sink has a higher heat transfer capacity than the RSMC heat sink. Among the heat sinks involved in this work, the V-shaped SCD heat sink has the best surface temperature uniformity. The symmetrically inclined heat sink shows the lowest pumping power, with 14.1 % lower than that of the RSMC heat sink. The X-shaped SCD heat sink exhibits a significantly lower thermal resistance, with an 8.5 % reduction compared to the RSMC heat sink. Additionally, it demonstrates a substantially higher Nusselt number, with a 27.6 % increase relative to the RSMC heat sink. The X-shaped SCD heat sink has the highest heat transfer coefficient of up to 1.08 × 105 W/(m2·K), which is 20.4 % higher than that of RSMC heat sink. Owing to the highest performance evaluation criterion of 1.22, the X-shaped straight microchannel heat sink is the most optimal of the designed heat sinks.
AB - Four-type novel single crystal diamond (SCD) straight microchannel heat sinks with different shapes (symmetrically inclined, turned symmetrically inclined, V-shaped, and X-shaped) are designed and investigated by the three-dimensional computational fluid dynamics method. These four-type microchannel heat sinks are evaluated in terms of fluid flow and heat transfer capabilities compared to the conventional rectangular straight microchannel (RSMC) heat sink. Our research indicates that the newly designed novel SCD microchannel heat sinks can enhance the heat dissipation effect in comparison to the conventional RSMC heat sink, thereby substantiating its potential for enhancing thermal management in electronic devices. Each V-shaped and X-shaped straight microchannel heat sink has a higher heat transfer capacity than the RSMC heat sink. Among the heat sinks involved in this work, the V-shaped SCD heat sink has the best surface temperature uniformity. The symmetrically inclined heat sink shows the lowest pumping power, with 14.1 % lower than that of the RSMC heat sink. The X-shaped SCD heat sink exhibits a significantly lower thermal resistance, with an 8.5 % reduction compared to the RSMC heat sink. Additionally, it demonstrates a substantially higher Nusselt number, with a 27.6 % increase relative to the RSMC heat sink. The X-shaped SCD heat sink has the highest heat transfer coefficient of up to 1.08 × 105 W/(m2·K), which is 20.4 % higher than that of RSMC heat sink. Owing to the highest performance evaluation criterion of 1.22, the X-shaped straight microchannel heat sink is the most optimal of the designed heat sinks.
KW - Heat transfer
KW - Numerical simulation
KW - Straight microchannel heat sink
KW - Thermal performance
UR - https://www.scopus.com/pages/publications/85173625184
U2 - 10.1016/j.diamond.2023.110479
DO - 10.1016/j.diamond.2023.110479
M3 - 文章
AN - SCOPUS:85173625184
SN - 0925-9635
VL - 140
JO - Diamond and Related Materials
JF - Diamond and Related Materials
M1 - 110479
ER -