The electrostatic-alloy bonding technique used in MEMS

Electrostatic-alloy bonding of silicon wafer with glass deposited by Au to form Si/Au-glass water, and bonding of Si/Au-glass with silicon wafer were researched during fabrication of pressure sensors. The silicon wafer and glass wafer with an Au film resistor were bonded by electrostatic bonding, and then Si-Au alloy bonding was formed by annealing at 400°C for 2 h. The air sealability of the cavity after bonding was finally tested using the N ₂ filling method. The results indicate that large bond strength was obtained at the bonding interface. This process was used in fabricating a pressure sensor with a sandwich structure. The results indicate that the sensor presented better performances and that the bonding techniques can be used in MEMS packaging.