TY - GEN
T1 - Research and evaluation of a high temperature pressure sensor chip
AU - Jiang, Zhuangde
AU - Zhao, Libo
AU - Zhao, Yulong
AU - Prewett, Philip D.
AU - Jiang, Kyle
PY - 2009
Y1 - 2009
N2 - In order to solve the pressure measurement problem in the harsh environment, such as high temperature above 200°C, a special piezoresistive pressure sensor chip has been developed. Based on the MEMS (Micro Electro-Mechanical System) and SIMOX (Separation by Implantation of Oxygen) technology, the piezoresistive pressure sensor chip was constituted by silicon substrate, a thin buried silicon dioxide layer by SIMOX, an optimized boron ion implantation doping layer, photolithographically patterned on a Wheatstone bridge configuration, stress matching layer with silicon nitride, and beam lead layer (Ti-Pt-Au) for bonding the gold wires. A special buried silicon dioxide layer with the thickness 367nm, which used to isolate the upper measuring circuit layer from the silicon substrate, was fabricated b~ the SIMOX technology with the oxygen ion dose of 1.4xl018 /cm2 and implantation energy of 200keV, so the leak-current between the upper measuring circuit layer and the silicon substrate was avoided. Utilizing the developed sensor chip and high temperature packaging process, a pressure sensor was fabricated with the range of 0̃25MPa, the experimental results showed that this pressure sensor had good performances under the high temperature of 200°C, such as accuracy of O.114% FS and natural frequency of about 694.4 kHz.
AB - In order to solve the pressure measurement problem in the harsh environment, such as high temperature above 200°C, a special piezoresistive pressure sensor chip has been developed. Based on the MEMS (Micro Electro-Mechanical System) and SIMOX (Separation by Implantation of Oxygen) technology, the piezoresistive pressure sensor chip was constituted by silicon substrate, a thin buried silicon dioxide layer by SIMOX, an optimized boron ion implantation doping layer, photolithographically patterned on a Wheatstone bridge configuration, stress matching layer with silicon nitride, and beam lead layer (Ti-Pt-Au) for bonding the gold wires. A special buried silicon dioxide layer with the thickness 367nm, which used to isolate the upper measuring circuit layer from the silicon substrate, was fabricated b~ the SIMOX technology with the oxygen ion dose of 1.4xl018 /cm2 and implantation energy of 200keV, so the leak-current between the upper measuring circuit layer and the silicon substrate was avoided. Utilizing the developed sensor chip and high temperature packaging process, a pressure sensor was fabricated with the range of 0̃25MPa, the experimental results showed that this pressure sensor had good performances under the high temperature of 200°C, such as accuracy of O.114% FS and natural frequency of about 694.4 kHz.
KW - High temperature
KW - MEMS
KW - Pressure
KW - SIMOX
KW - Sensor chip
UR - https://www.scopus.com/pages/publications/70349665577
U2 - 10.1109/NEMS.2009.5068667
DO - 10.1109/NEMS.2009.5068667
M3 - 会议稿件
AN - SCOPUS:70349665577
SN - 9781424446308
T3 - 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009
SP - 661
EP - 665
BT - 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009
T2 - 4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2009
Y2 - 5 January 2009 through 8 January 2009
ER -