Preliminary Implementation of High-Resolution Multi-Scale coupling calculations for the entire pressure vessel based on OpenFOAM

Significant coupling effects exist among system components in nuclear pressure vessel. Due to the complex geometric structures, the nuclear industry primarily relies on system codes or sub-channel methods for core safety analysis. However, these methods suffer from low model accuracy and insufficient coupling capabilities. Additionally, the differences in model scales impede direct coupling analysis with the CFD calculations of the plenum system. To address these issues, this paper proposes a multi −scale coupling calculation method for the entire pressure vessel: For the plenum system, detailed CFD modeling is employed, while the core calculations are conducted using CorTAF, a high-resolution core Multiphysics-coupling analysis method developed by our team. A cross-resolution coupling model is utilized to integrate the two, achieving cross-resolution coupling simulations for the entire pressure vessel, encompassing both the plenum and core system. The above method was applied to the coupling calculations of a typical pressurized water reactor's lower plenum and core, revealing detailed thermal–hydraulic phenomena under precise core flow inlet distribution conditions. The lateral flow at the core inlet exceeds 1 m/s, with the maximum and minimum fluid velocities in the subchannels deviating by up to 70 % from the average velocity of 2.42 m/s. The flow distribution only begins to stabilize after a height of 1.2 m in the core. The paper also includes inlet asymmetric flow reduction calculations. Overall, the method enables multi-scale and multi-physics coupling calculations, which provide significant reference value for improving the accuracy of current core safety analyses.