Preliminary design and thermal analysis of a liquid metal heat pipe radiator for TOPAZ-II power system

An alkali metal heat pipe radiator is proposed for the Russian TOPAZ-II space reactor power system to replace the original pumped loop radiator with three advantages. First, the single point failure problem of the original radiator can be avoided. Second, because only the NaK manifold needs to be armored, the specific mass would be reduced and the reliability and survivability can be improved. Third, the heat pipe has nearly isothermal characteristics and high heat transfer capabilities. In the present paper, the high temperature heat pipes using potassium as working fluid, wire screen mesh as wick layer, made of stainless steel are adopted to remove waste heat by radiation. An integral carbon-carbon fin covering and connecting heat pipes as whole heat transfer radiator is selected for its higher thermal conductivity and lower self-weight. A detailed steady state numerical calculation using the finite element method coupled with finite difference method is performed to predict the heat rejection characteristics of the heat pipe radiator. Heat transfer performances of the new concept heat pipe radiator and the pumped loop radiator are compared with key parameters. The results show that the designed heat pipe radiator satisfies the waste heat rejection requirements of the TOPAZ-II power system under the normal operating conditions and has an ideal redundancy. The isothermal and safety of heat pipe radiator is also better than that of pumped loop radiator.