摘要
A genetic algorithm is coupled with a finite element model to optimise the arrangement of constraints for a composite press-forming problem. A series of springs are used to locally apply in-plane tension through clamps to the fibre preform to control material draw-in. The optimisation procedure seeks to minimise local in-plane shear angles by determining the optimum location and size of constraining clamps, and the stiffness of connected springs. Results are presented for a double-dome geometry, which are compared against data from the literature using alternative means to apply constraints. Controlling material draw-in using in-plane constraints around the blank perimeter is an effective way of homogenising the shear angle distribution and minimising the maximum shear angle. However, an alternative set-up with a segmented blank holder has the potential to produce fewer wrinkles in the fabric due to lower peak compressive strains along the fibre directions.
| 源语言 | 英语 |
|---|---|
| 出版状态 | 已出版 - 2015 |
| 已对外发布 | 是 |
| 活动 | 20th International Conference on Composite Materials, ICCM 2015 - Copenhagen, 丹麦 期限: 19 7月 2015 → 24 7月 2015 |
会议
| 会议 | 20th International Conference on Composite Materials, ICCM 2015 |
|---|---|
| 国家/地区 | 丹麦 |
| 市 | Copenhagen |
| 时期 | 19/07/15 → 24/07/15 |
学术指纹
探究 'Optimisation of forming process for highly drapeable fabrics' 的科研主题。它们共同构成独一无二的学术指纹。引用此
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver