Numerical simulation of fluid-particle flow of jet in supercritical water environment

Supercritical water gasification provides a new approach to the green transformation of coal. Nevertheless, the flow characteristics of fluids and particles injected into the reactor through the nozzle still need to be further investigated. In this paper, a three-dimensional numerical simulation of the particle jet in supercritical water environment is carried out coupling Large Eddy Simulation (LES) with Discrete Phase Model (DPM). The simulation focuses on the effects of particle size, Stokes number, mass flux ratio and initial fluid velocity on the flow characteristic of the fluid-particle flow, especially on the vortex structure evolution, particle distribution and velocity profile. The findings are that as the particle size decreases and the initial fluid velocity increases, the evolution of vortex structures become increasingly fierce, such as the destruction of large-scale coherent structures, the disappearance of vortex ribs, and the lateral expansion of vortices in the development section. Particle distribution exhibits characteristics similar to the vortex structure, as particles adhere closely to the carrier fluid at low Stokes number (St < 1). On the contrary, with increasing of Stokes number (St > 1), the particles are freer from fluid interference and keep their original motion state moving forward. The fluid velocity at the center of the transverse interface jet decrease with increased mass flow ratio. For higher initial fluid velocities, particle distribution is more uniform, and more particles are carried to areas with larger radial distances.