Mode control by rearrangement of the slow wave structure in a 12-cavity relativistic magnetron with diffraction output using single-stepped cavities driven by a transparent cathode

We present the design of an agile slow wave structure for a "crab-like"A12 relativistic magnetron with diffraction output using single-stepped cavities. By regrouping the interaction region as three sets of four cavities, the TE31 operating mode is generated at 2.60 GHz with 1.0 GW output power for an applied voltage of U = 350 kV and a magnetic field of B = 0.34 T. By regrouping the interaction region as four sets of three cavities, the TE41 operating mode is generated at 2.82 GHz with 1.0 GW output power for an applied voltage of U = 355 kV and a magnetic field of B = 0.36 T. Furthermore, by regrouping the interaction region as six sets of two cavities, the TE31 mode and the TE21 mode are generated. When an applied voltage of U = 350 kV and a magnetic field of B = 0.33 T are used, its output power can be as high as 1.0 GW for the TE31 mode operating at 2.5 GHz. In addition, when an applied voltage of U = 350 kV and a magnetic field of B = 0.42 T are used, its output power can be as high as 1.0 GW with operating mode TE21 at 2.62 GHz. It was found that the rearrangement of the slow wave structure can control the operating mode and, at the same time, lower the operating condition of the beam/wave interaction compared to the traditional 12-cavity relativistic magnetron. The result suggests that this configuration is favorable for mode switching through mechanical rearrangement of the slow wave structure. This work seeks to design a compact high power microwave source for a narrowband directed microwave beam that is suitable for mode switching investigations.