跳到主要导航 跳到搜索 跳到主要内容

Microstructure and mechanical properties of laser melting deposited γ-TiAl intermetallic alloys

  • Beihang University

科研成果: 期刊稿件 › 文章 › 同行评审

116 引用 (Scopus)

摘要

Ti-47Al-2.5V-1Cr intermetallic alloy was fabricated by the laser melting deposition (LMD) manufacturing process. The microstructure was characterized by OM, SEM, TEM and XRD. The tensile properties and Vickers microhardness were evaluated on both longitudinal and transverse directions. Results showed that full density directionally solidified (DS) columnar grain with fully lamellar (FL) microstructure consisted of γ-TiAl and α2-Ti3Al lamellae was formed in the as-laser deposited samples along the longitudinal direction due to the high thermal gradient. The room-temperature tensile strength of the as-deposited alloy is up to approximately 650 MPa in the longitudinal direction and 600 MPa in the transverse direction, while the tensile elongation on both directions is approximately 0.6%. The tensile fracture surfaces are different for the longitudinal and transverse directions, indicating that the room-temperature tensile properties were affected by the DS microstructure.

源语言英语
页(从-至)187-194
页数8
期刊Materials Science and Engineering: A
卷466
期1-2
DOI
出版状态已出版 - 25 9月 2007
已对外发布是

学术指纹

探究 'Microstructure and mechanical properties of laser melting deposited γ-TiAl intermetallic alloys' 的科研主题。它们共同构成独一无二的学术指纹。

引用此