Methods and preliminary measurement results of liquid Li wettability

G. Z. Zuo; J. S. Hu; J. Ren; Z. Sun; Q. X. Yang; J. G. Li; L. E. Zakharov; D. K. Mansfield

doi:10.1063/1.4865118

Methods and preliminary measurement results of liquid Li wettability

G. Z. Zuo
, J. S. Hu
, J. Ren
, Z. Sun
, Q. X. Yang
, J. G. Li
, L. E. Zakharov
, D. K. Mansfield

电气工程学院

CAS - Institute of Plasma Physics
Princeton Plasma Physics Laboratory

科研成果: 期刊稿件 › 文献综述 › 同行评审

20 引用（Scopus）

摘要

A test of lithium wettability was performed in high vacuum (< 3 × 10^-4 Pa). High magnification images of Li droplets on stainless steel substrates were produced and processed using the MATLAB^® program to obtain clear image edge points. In contrast to the more standard "θ/2" or polynomial fitting methods, ellipse fitting of the complete Li droplet shape resulted in reliable contact angle measurements over a wide range of contact angles. Using the ellipse fitting method, it was observed that the contact angle of a liquid Li droplet on a stainless steel substrate gradually decreased with increasing substrate temperature. The critical wetting temperature of liquid Li on stainless steel was observed to be about 290 C.

源语言	英语
文章编号	023506
期刊	Review of Scientific Instruments
卷	85
期	2
DOI	https://doi.org/10.1063/1.4865118
出版状态	已出版 - 2月 2014

访问文件

10.1063/1.4865118

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{7b7ba6ba8077416891e5da17e747ea81,

title = "Methods and preliminary measurement results of liquid Li wettability",

abstract = "A test of lithium wettability was performed in high vacuum (< 3 × 10-4 Pa). High magnification images of Li droplets on stainless steel substrates were produced and processed using the MATLAB{\textregistered} program to obtain clear image edge points. In contrast to the more standard {"}θ/2{"} or polynomial fitting methods, ellipse fitting of the complete Li droplet shape resulted in reliable contact angle measurements over a wide range of contact angles. Using the ellipse fitting method, it was observed that the contact angle of a liquid Li droplet on a stainless steel substrate gradually decreased with increasing substrate temperature. The critical wetting temperature of liquid Li on stainless steel was observed to be about 290 C.",

author = "Zuo, \{G. Z.\} and Hu, \{J. S.\} and J. Ren and Z. Sun and Yang, \{Q. X.\} and Li, \{J. G.\} and Zakharov, \{L. E.\} and Mansfield, \{D. K.\}",

year = "2014",

month = feb,

doi = "10.1063/1.4865118",

language = "英语",

volume = "85",

journal = "Review of Scientific Instruments",

issn = "0034-6748",

publisher = "American Institute of Physics",

number = "2",

}

TY - JOUR

T1 - Methods and preliminary measurement results of liquid Li wettability

AU - Zuo, G. Z.

AU - Hu, J. S.

AU - Ren, J.

AU - Sun, Z.

AU - Yang, Q. X.

AU - Li, J. G.

AU - Zakharov, L. E.

AU - Mansfield, D. K.

PY - 2014/2

Y1 - 2014/2

N2 - A test of lithium wettability was performed in high vacuum (< 3 × 10-4 Pa). High magnification images of Li droplets on stainless steel substrates were produced and processed using the MATLAB® program to obtain clear image edge points. In contrast to the more standard "θ/2" or polynomial fitting methods, ellipse fitting of the complete Li droplet shape resulted in reliable contact angle measurements over a wide range of contact angles. Using the ellipse fitting method, it was observed that the contact angle of a liquid Li droplet on a stainless steel substrate gradually decreased with increasing substrate temperature. The critical wetting temperature of liquid Li on stainless steel was observed to be about 290 C.

AB - A test of lithium wettability was performed in high vacuum (< 3 × 10-4 Pa). High magnification images of Li droplets on stainless steel substrates were produced and processed using the MATLAB® program to obtain clear image edge points. In contrast to the more standard "θ/2" or polynomial fitting methods, ellipse fitting of the complete Li droplet shape resulted in reliable contact angle measurements over a wide range of contact angles. Using the ellipse fitting method, it was observed that the contact angle of a liquid Li droplet on a stainless steel substrate gradually decreased with increasing substrate temperature. The critical wetting temperature of liquid Li on stainless steel was observed to be about 290 C.

UR - https://www.scopus.com/pages/publications/84894215044

U2 - 10.1063/1.4865118

DO - 10.1063/1.4865118

M3 - 文献综述

AN - SCOPUS:84894215044

SN - 0034-6748

VL - 85

JO - Review of Scientific Instruments

JF - Review of Scientific Instruments

IS - 2

M1 - 023506

ER -

Methods and preliminary measurement results of liquid Li wettability

摘要

访问文件

其它文件与链接

学术指纹

引用此