TY - JOUR
T1 - Magnesium-Doped Nickel Oxide Hole Transport Layer Achieves High Efficiency and Stability Perovskite Solar Cells†
AU - Zhang, Tengfei
AU - Chen, Liwei
AU - Li, Renjie
AU - Geng, Yuwei
AU - Chen, Bo
AU - Wu, Qiang
AU - Ma, Wei
AU - Hou, Juan
N1 - Publisher Copyright:
© 2025 SIOC, CAS, Shanghai, & WILEY-VCH GmbH.
PY - 2026/1/15
Y1 - 2026/1/15
N2 - Perovskite solar cells (PSCs) are promising thin-film photovoltaic devices and achieve a high power conversion efficiency (PCE) of 27.3% (certified). Hole transport layer (HTL) composed of nickel oxide (NiOx) and [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) is extensively utilized in these devices. However, the dispersion and conductivity of NiOx are suboptimal, and it exhibits energy-level mismatch. Meanwhile, the coverage of Me-4PACz on NiOx is non-uniform. Herein, we synthesized magnesium ion-doped nickel oxide (Mg:NiOx) with more surface hydroxyl groups to address these issues. More surface hydroxyl groups provided more binding sites for Me-4PACz, resulting in a denser and more uniform coverage of Me-4PACz. Consequently, fewer defects were present at the buried interface, and a better environment for the crystallization of perovskite (PVK) was established. Furthermore, Mg:NiOx/Me-4PACz enabled better energy level alignment with PVK. The Mg:NiOx-based PSCs achieved a champion PCE of 25.86%, representing a notable improvement over the NiOx-based devices (24.51%). After 462 h of continuous illumination testing, the PSCs with Mg:NiOx retained 96.8% of their initial PCE, while those with NiOx only maintained 62.9% of their initial PCE. Thus, Mg:NiOx effectively enhanced both the PCE and stability of PSCs.
AB - Perovskite solar cells (PSCs) are promising thin-film photovoltaic devices and achieve a high power conversion efficiency (PCE) of 27.3% (certified). Hole transport layer (HTL) composed of nickel oxide (NiOx) and [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) is extensively utilized in these devices. However, the dispersion and conductivity of NiOx are suboptimal, and it exhibits energy-level mismatch. Meanwhile, the coverage of Me-4PACz on NiOx is non-uniform. Herein, we synthesized magnesium ion-doped nickel oxide (Mg:NiOx) with more surface hydroxyl groups to address these issues. More surface hydroxyl groups provided more binding sites for Me-4PACz, resulting in a denser and more uniform coverage of Me-4PACz. Consequently, fewer defects were present at the buried interface, and a better environment for the crystallization of perovskite (PVK) was established. Furthermore, Mg:NiOx/Me-4PACz enabled better energy level alignment with PVK. The Mg:NiOx-based PSCs achieved a champion PCE of 25.86%, representing a notable improvement over the NiOx-based devices (24.51%). After 462 h of continuous illumination testing, the PSCs with Mg:NiOx retained 96.8% of their initial PCE, while those with NiOx only maintained 62.9% of their initial PCE. Thus, Mg:NiOx effectively enhanced both the PCE and stability of PSCs.
KW - Defect passivation
KW - Hole transport layer
KW - Hydroxyl groups
KW - Mg-doped NiO
KW - Non-radiative voltage loss
KW - Perovskite solar cells
KW - Power conversion efficiency
KW - Stability
UR - https://www.scopus.com/pages/publications/105021238020
U2 - 10.1002/cjoc.70333
DO - 10.1002/cjoc.70333
M3 - 文章
AN - SCOPUS:105021238020
SN - 1001-604X
VL - 44
SP - 217
EP - 224
JO - Chinese Journal of Chemistry
JF - Chinese Journal of Chemistry
IS - 2
ER -