Low-temperature (< 100°C) poly-si thin film fabrication on glass

Polycrystalline silicon (poly-Si) thin-film is fabricated on Al-coated planar glass substrates at the temperature below 100 °C, using aluminium-induced crystallized (AIC) amorphous silicon (a-Si) deposited by dc-magnetron sputtering under an electric field. The properties of NA poly-Si films (AIC of dc-magnetron sputtered silicon non-annealing) are characterized by Raman spectroscopy and x-ray diffraction (XRD) spectroscopy. A narrow and symmetrical Raman peak at a wave number of about 521 cm^-1 is observed for samples, showing that the films are fully crystallized. XRD spectra reveal that the films are preferentially (111) oriented. Furthermore, the XRD spectrum of the sample prepared without electric field does not show any XRD peaks for poly-Si, which only appears at about 38° for Al (111) orientation. It is indicated that the electric field plays an important role in crystallization of poly-Si during the dc-magnetron sputtering. Thus, high quality poly-Si film can be obtained at low temperature and separate post-deposition step of AIC of a-silicon can be avoided.