TY - JOUR
T1 - Low-temperature-gradient crystallization for multi-inch high-quality perovskite single crystals for record performance photodetectors
AU - Liu, Yucheng
AU - Zhang, Yunxia
AU - Yang, Zhou
AU - Feng, Jiangshan
AU - Xu, Zhuo
AU - Li, Qingxian
AU - Hu, Mingxin
AU - Ye, Haochen
AU - Zhang, Xu
AU - Liu, Ming
AU - Zhao, Kui
AU - Liu, Shengzhong(Frank)
N1 - Publisher Copyright:
© 2018 Elsevier Ltd
PY - 2019/1/1
Y1 - 2019/1/1
N2 - With their excellent optoelectronic properties, the practical application of single-crystalline organolead halide perovskite materials is now limited by the lack of a method to prepare high-quality perovskite single crystals in large dimension. Herein, we report our development of a low-temperature-gradient crystallization (LTGC) method for high-quality CH 3 NH 3 PbBr 3 (MAPbBr 3 ) perovskite single crystals with lateral dimension as large as two inches. The theoretical analysis suggests that a small temperature gradient should be used to restrain the growth condition, particularly the solution concentration, within the optimal single-crystal-growth (OSCG) zone. The solubility curve as a function of temperature reveals a sharp turning point at ∼60 °C, across which the first-order solubility derivative (dC/dT) shows very different behaviors: below this temperature, the dC/dT changes dramatically as the temperature increases, while above this temperature, the dC/dT enters a plateau where further temperature change has little effect on the derivative, meaning that one can attain both a substantial crystal growth rate and crystallization yield below this temperature. Utilizing this discovery, a MAPbBr 3 single crystal as large as 47 × 41 × 14 mm is obtained with high quality via the LTGC method. The single crystal exhibits the best optoelectronic quality among all MAPbBr 3 materials reported in the literature, including the best trap state density, mobility, carrier lifetime, and diffusion length. These superior optoelectronic properties are further transferred into a high-performance planar photodetector. The device exhibits high operational stability, high external quantum efficiency (13,453%), excellent detectivity as high as 8 × 10 13 Jones, and a fast response speed as quick as 15.8 μs. To our knowledge, both the detectivity and the response speed are the best among all MAPbBr 3 devices reported to date. The unique synthesis method and excellent crystalline quality of the perovskite single crystals make them promising candidates for the next generation of optoelectronic devices.
AB - With their excellent optoelectronic properties, the practical application of single-crystalline organolead halide perovskite materials is now limited by the lack of a method to prepare high-quality perovskite single crystals in large dimension. Herein, we report our development of a low-temperature-gradient crystallization (LTGC) method for high-quality CH 3 NH 3 PbBr 3 (MAPbBr 3 ) perovskite single crystals with lateral dimension as large as two inches. The theoretical analysis suggests that a small temperature gradient should be used to restrain the growth condition, particularly the solution concentration, within the optimal single-crystal-growth (OSCG) zone. The solubility curve as a function of temperature reveals a sharp turning point at ∼60 °C, across which the first-order solubility derivative (dC/dT) shows very different behaviors: below this temperature, the dC/dT changes dramatically as the temperature increases, while above this temperature, the dC/dT enters a plateau where further temperature change has little effect on the derivative, meaning that one can attain both a substantial crystal growth rate and crystallization yield below this temperature. Utilizing this discovery, a MAPbBr 3 single crystal as large as 47 × 41 × 14 mm is obtained with high quality via the LTGC method. The single crystal exhibits the best optoelectronic quality among all MAPbBr 3 materials reported in the literature, including the best trap state density, mobility, carrier lifetime, and diffusion length. These superior optoelectronic properties are further transferred into a high-performance planar photodetector. The device exhibits high operational stability, high external quantum efficiency (13,453%), excellent detectivity as high as 8 × 10 13 Jones, and a fast response speed as quick as 15.8 μs. To our knowledge, both the detectivity and the response speed are the best among all MAPbBr 3 devices reported to date. The unique synthesis method and excellent crystalline quality of the perovskite single crystals make them promising candidates for the next generation of optoelectronic devices.
UR - https://www.scopus.com/pages/publications/85047071039
U2 - 10.1016/j.mattod.2018.04.002
DO - 10.1016/j.mattod.2018.04.002
M3 - 文章
AN - SCOPUS:85047071039
SN - 1369-7021
VL - 22
SP - 67
EP - 75
JO - Materials Today
JF - Materials Today
ER -