Latest progress on R&D of ITER DFLL-TBM in China

Qunying Huang; Qingsheng Wu; Shaojun Liu; Chunjing Li; Bo Huang; L. Peng; Shuhui Zheng; Qian Han; Yican Wu

doi:10.1016/j.fusengdes.2011.03.099

Latest progress on R&D of ITER DFLL-TBM in China

Qunying Huang
, Qingsheng Wu
, Shaojun Liu
, Chunjing Li
, Bo Huang
, L. Peng
, Shuhui Zheng
, Qian Han
, Yican Wu

能源与动力工程学院

CAS - Institute of Plasma Physics
University of Science and Technology of China

科研成果: 期刊稿件 › 文章 › 同行评审

29 引用（Scopus）

摘要

The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.

源语言	英语
页（从-至）	2611-2615
页数	5
期刊	Fusion Engineering and Design
卷	86
期	9-11
DOI	https://doi.org/10.1016/j.fusengdes.2011.03.099
出版状态	已出版 - 10月 2011

访问文件

10.1016/j.fusengdes.2011.03.099

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{9f8977e0789d4713b60949cbd913c411,

title = "Latest progress on R\&D of ITER DFLL-TBM in China",

abstract = "The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.",

keywords = "CLAM steel, R\&D, TBM",

author = "Qunying Huang and Qingsheng Wu and Shaojun Liu and Chunjing Li and Bo Huang and L. Peng and Shuhui Zheng and Qian Han and Yican Wu",

year = "2011",

month = oct,

doi = "10.1016/j.fusengdes.2011.03.099",

language = "英语",

volume = "86",

pages = "2611--2615",

journal = "Fusion Engineering and Design",

issn = "0920-3796",

publisher = "Elsevier B.V.",

number = "9-11",

}

TY - JOUR

T1 - Latest progress on R&D of ITER DFLL-TBM in China

AU - Huang, Qunying

AU - Wu, Qingsheng

AU - Liu, Shaojun

AU - Li, Chunjing

AU - Huang, Bo

AU - Peng, L.

AU - Zheng, Shuhui

AU - Han, Qian

AU - Wu, Yican

PY - 2011/10

Y1 - 2011/10

N2 - The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.

AB - The China Low Activation Martensitic (CLAM) steel is being developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences) under wide collaboration with many institutes and universities. A heat of 1.2 tons was fabricated and tested. The tested main compositions are eligible and without segregation. The tensile, Charpy impact and fracture toughness tests showed that its mechanical properties were similar to those of small ingots of CLAM steel. Also, joining techniques such as Electron Beam Welding (EBW), Hot Isostatic Pressing-Diffusion Welding (HIP-DW) and fabrication techniques of rectangular tube with CLAM steel were studied in details. And a 1/3 scaled mockup of Test Blanket Module (TBM) by P91 are being fabricated to explore TBM fabrication technology.

KW - CLAM steel

KW - R&D

KW - TBM

UR - https://www.scopus.com/pages/publications/80054025196

U2 - 10.1016/j.fusengdes.2011.03.099

DO - 10.1016/j.fusengdes.2011.03.099

M3 - 文章

AN - SCOPUS:80054025196

SN - 0920-3796

VL - 86

SP - 2611

EP - 2615

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

IS - 9-11

ER -

Latest progress on R&D of ITER DFLL-TBM in China

摘要

访问文件

其它文件与链接

学术指纹

引用此