TY - JOUR
T1 - Influence of Pulse Energy and Scanning Speed of Femtosecond Laser on Surface Roughness of SiC Ceramics
AU - Zheng, Qingzhen
AU - Jiang, Gedong
AU - Cui, Jianlei
AU - Fan, Zhengjie
AU - Sun, Zheng
AU - Mei, Xuesong
N1 - Publisher Copyright:
© 2021 Taylor & Francis Group, LLC.
PY - 2021
Y1 - 2021
N2 - Laser polishing, as a novel surface processing technology, has been successfully employed for improving the surface smoothness and geometric accuracy of components for metals, glasses, fibers and ceramics. However, continuous wave and microsecond and nanosecond lasers leads to some undesirable defects of the polished surface, such as heat affected zone, debris redeposition and thermal stress induced microcracks, especially for hard brittle materials. To solve this issue, this article investigated femtosecond laser polishing of SiC ceramics. Influence of pulse energy and scanning speed on surface roughness and surface morphologies was studied. In addition, the relationship between laser parameters and surface roughness and removal depth of SiC ceramics has been revealed. The experimental results indicated that the polished surface without big voids and spalling was obtained through optimizing femtosecond laser parameters.
AB - Laser polishing, as a novel surface processing technology, has been successfully employed for improving the surface smoothness and geometric accuracy of components for metals, glasses, fibers and ceramics. However, continuous wave and microsecond and nanosecond lasers leads to some undesirable defects of the polished surface, such as heat affected zone, debris redeposition and thermal stress induced microcracks, especially for hard brittle materials. To solve this issue, this article investigated femtosecond laser polishing of SiC ceramics. Influence of pulse energy and scanning speed on surface roughness and surface morphologies was studied. In addition, the relationship between laser parameters and surface roughness and removal depth of SiC ceramics has been revealed. The experimental results indicated that the polished surface without big voids and spalling was obtained through optimizing femtosecond laser parameters.
KW - Laser polishing
KW - SiC ceramics
KW - femtosecond laser
KW - surface morphologies
KW - surface roughness
UR - https://www.scopus.com/pages/publications/85115663456
U2 - 10.1080/10584587.2021.1911349
DO - 10.1080/10584587.2021.1911349
M3 - 文章
AN - SCOPUS:85115663456
SN - 1058-4587
VL - 219
SP - 20
EP - 27
JO - Integrated Ferroelectrics
JF - Integrated Ferroelectrics
IS - 1
ER -