跳到主要导航 跳到搜索 跳到主要内容

In situ hybrid crosslinking polymerization of 1,3-dioxolane on functionalized nanoparticles for ultrathin solid polymer electrolytes enabling Long-cycling Lithium-metal batteries

  • Jingjin Xu
  • , Anli Wang
  • , Zirui Qiu
  • , Junyi Fang
  • , Qiang Lu
  • , Siyao Song
  • , Zihan Lin
  • , Sihui Tian
  • , Mingze Sun
  • , Jixian Lv
  • , Weike Yu
  • , Siming Yang
  • , Xiaoqun Qi
  • , Weichang Guo
  • , Jia Li
  • , Fei Shen
  • , Xiaogang Han
  • Xi'an Jiaotong University
  • Ltd.
  • Thermal Power Research Institute

科研成果: 期刊稿件 › 文章 › 同行评审

4 引用 (Scopus)

摘要

Poor interfacial contact poses a major limitation to the performance of solid-state batteries. In situ polymerization has emerged as an effective strategy to improve interfacial contact and facilitate ion transport. Among various monomers, 1,3-dioxolane (DOL) can be readily polymerized into poly(1,3-dioxolane) (PDOL), which exhibits high ionic conductivity and good chemical stability while maintaining intimate interfacial contact. However, the mechanical strength and electrochemical stability of pure PDOL electrolytes remain inadequate. Introducing inorganic fillers, especially high-ferroelectric nanoparticles, can enhance mechanical properties and homogenize the electric field distribution. Nevertheless, nanoparticle agglomeration during prolonged in situ polymerization poses a significant challenge. In this work, we develop a two-step approach to address these issues: first, modifying the surface of high-ferroelectric BaTiO3 nanoparticles, and then constructing an in situ homogenized organic/inorganic crosslinked network. The resulting ultrathin (∼7 μm) solid polymer electrolyte demonstrates significantly improved performance, including a high Li+ transference number (0.68 vs. 0.44 for pure PDOL), a widened electrochemical window (4.9 V vs. 4.3 V for pure PDOL), and exceptional cycling stability. Li||Li symmetric cells stably cycle for over 2000 h at 0.5 mA cm−2. LiFePO4||Li full cells deliver a high specific capacity of 156 mAh g−1 at 0.5C with 93.1 % capacity retention after 250 cycles, and 146 mAh g−1 at 1C with a decay rate of only 0.04 % per cycle. The electrolyte also shows excellent compatibility with LiNi0.8Co0.1Mn0.1O2 cathodes, providing an initial capacity of 193 mAh g−1 and retaining 158 mAh g−1 after 150 cycles at 1C.

源语言英语
期刊论文编号139442
期刊Journal of Colloid and Interface Science
卷704
DOI
出版状态已出版 - 15 2月 2026

学术指纹

探究 'In situ hybrid crosslinking polymerization of 1,3-dioxolane on functionalized nanoparticles for ultrathin solid polymer electrolytes enabling Long-cycling Lithium-metal batteries' 的科研主题。它们共同构成独一无二的学术指纹。

引用此