Impact of the voids on the cracking behavior of the duplex oxide scale on the 18%Cr austenite alloy surface

Jingbo Yan; Yike Qiu; Bo Da; Zeyuan Li; Yefei Li; Zejun Ding; Lifeng Ma; Peng Zhang; Yong Yuan; Y. Gu

doi:10.1016/j.corsci.2019.108298

Impact of the voids on the cracking behavior of the duplex oxide scale on the 18%Cr austenite alloy surface

Jingbo Yan
, Yike Qiu
, Bo Da
, Zeyuan Li
, Yefei Li
, Zejun Ding
, Lifeng Ma
, Peng Zhang
, Yong Yuan
, Y. Gu

Thermal Power Research Institute
Xi'an Jiaotong University
National Institute for Materials Science Tsukuba
University of Science and Technology of China

科研成果: 期刊稿件 › 文章 › 同行评审

11 引用（Scopus）

摘要

This work investigated the oxide cracking behavior of 18%Cr austenitic steels. The role of voids at the duplex oxide layer interface has been discussed. Simulation results demonstrate that the stress concentration facilitates the crack nucleation at the void top. Interestingly, the interface of the duplex oxide layer exhibits better cracking resistance. Experiment results confirm that the voids facilitate cracking when the temperature drop is beyond 119 °C during oxidizing at 650 °C for TP347H alloy. By comparing, more than 290 °C of temperature drop is needed for the cracking on TP347HFG alloy, which is because the void diameter is small.

源语言	英语
期刊论文编号	108298
期刊	Corrosion Science
卷	163
DOI	https://doi.org/10.1016/j.corsci.2019.108298
出版状态	已出版 - 2月 2020

访问文件

10.1016/j.corsci.2019.108298

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{27714a6ea2d24f20b366a89689c7d824,

title = "Impact of the voids on the cracking behavior of the duplex oxide scale on the 18\%Cr austenite alloy surface",

abstract = "This work investigated the oxide cracking behavior of 18\%Cr austenitic steels. The role of voids at the duplex oxide layer interface has been discussed. Simulation results demonstrate that the stress concentration facilitates the crack nucleation at the void top. Interestingly, the interface of the duplex oxide layer exhibits better cracking resistance. Experiment results confirm that the voids facilitate cracking when the temperature drop is beyond 119 °C during oxidizing at 650 °C for TP347H alloy. By comparing, more than 290 °C of temperature drop is needed for the cracking on TP347HFG alloy, which is because the void diameter is small.",

keywords = "Ab initio calculation, Austenitic steels, Finite element analysis, Interface defects, Scale adhesion",

author = "Jingbo Yan and Yike Qiu and Bo Da and Zeyuan Li and Yefei Li and Zejun Ding and Lifeng Ma and Peng Zhang and Yong Yuan and Y. Gu",

note = "Publisher Copyright: {\textcopyright} 2019 Elsevier Ltd",

year = "2020",

month = feb,

doi = "10.1016/j.corsci.2019.108298",

language = "英语",

volume = "163",

journal = "Corrosion Science",

issn = "0010-938X",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - Impact of the voids on the cracking behavior of the duplex oxide scale on the 18%Cr austenite alloy surface

AU - Yan, Jingbo

AU - Qiu, Yike

AU - Da, Bo

AU - Li, Zeyuan

AU - Li, Yefei

AU - Ding, Zejun

AU - Ma, Lifeng

AU - Zhang, Peng

AU - Yuan, Yong

AU - Gu, Y.

PY - 2020/2

Y1 - 2020/2

N2 - This work investigated the oxide cracking behavior of 18%Cr austenitic steels. The role of voids at the duplex oxide layer interface has been discussed. Simulation results demonstrate that the stress concentration facilitates the crack nucleation at the void top. Interestingly, the interface of the duplex oxide layer exhibits better cracking resistance. Experiment results confirm that the voids facilitate cracking when the temperature drop is beyond 119 °C during oxidizing at 650 °C for TP347H alloy. By comparing, more than 290 °C of temperature drop is needed for the cracking on TP347HFG alloy, which is because the void diameter is small.

AB - This work investigated the oxide cracking behavior of 18%Cr austenitic steels. The role of voids at the duplex oxide layer interface has been discussed. Simulation results demonstrate that the stress concentration facilitates the crack nucleation at the void top. Interestingly, the interface of the duplex oxide layer exhibits better cracking resistance. Experiment results confirm that the voids facilitate cracking when the temperature drop is beyond 119 °C during oxidizing at 650 °C for TP347H alloy. By comparing, more than 290 °C of temperature drop is needed for the cracking on TP347HFG alloy, which is because the void diameter is small.

KW - Ab initio calculation

KW - Austenitic steels

KW - Finite element analysis

KW - Interface defects

KW - Scale adhesion

UR - https://www.scopus.com/pages/publications/85074439926

U2 - 10.1016/j.corsci.2019.108298

DO - 10.1016/j.corsci.2019.108298

M3 - 文章

AN - SCOPUS:85074439926

SN - 0010-938X

VL - 163

JO - Corrosion Science

JF - Corrosion Science

M1 - 108298

ER -

Impact of the voids on the cracking behavior of the duplex oxide scale on the 18%Cr austenite alloy surface

摘要

访问文件

其它文件与链接

学术指纹

引用此