TY - JOUR
T1 - Ignition characteristics of flowing ammonia-containing mixtures with nanosecond pulsed discharges
AU - Liu, Bowen
AU - Guo, Xiaoyang
AU - Chen, Zihao
AU - Hu, Erjiang
AU - Zhao, Hao
AU - Huang, Zuohua
N1 - Publisher Copyright:
Copyright © 2025. Published by Elsevier Ltd.
PY - 2026/3/1
Y1 - 2026/3/1
N2 - The ignition and flame propagation characteristics of ammonia-containing mixtures under flowing conditions were investigated using a mini-wind tunnel combustion chamber coupled with nanosecond pulsed discharges. The ignition probability and minimum ignition energy (MIE) for flowing ammonia (NH3)/air and NH3/ethylene(C2H4)/air mixtures were measured, evaluating the effects of equivalence ratios, fuel compositions, flow velocities, and discharge parameters through experimental measurements and data analysis. The MIE of NH3/air mixtures varied non-monotonically with the equivalence ratio, reaching a minimum near an equivalence ratio of 0.85. The flame kernel area and chemiluminescence intensities of NH3/air flames also showed a tendency to increase and then decrease as the equivalence ratio increased on the lean side. For NH3/C2H4/air mixtures, higher flow velocities and greater ammonia fractions increased the MIE due to enhanced convective heat losses and reduced chemical reactivity. The flame propagation process was divided into four stages: ignition, quasi-steady-state development, wall-touch propagation, and outflow. In the fully coupled state, at lower discharge frequencies and larger pulse numbers, flame kernel growth was significantly enhanced. However, a saturation point was reached beyond which additional pulses or increasing frequencies did not notably change the kernel size. This study provides critical insights into plasma-assisted ignition and flame propagation under flowing conditions for ammonia-containing fuels, contributing to the advancement of low-carbon combustion technologies.
AB - The ignition and flame propagation characteristics of ammonia-containing mixtures under flowing conditions were investigated using a mini-wind tunnel combustion chamber coupled with nanosecond pulsed discharges. The ignition probability and minimum ignition energy (MIE) for flowing ammonia (NH3)/air and NH3/ethylene(C2H4)/air mixtures were measured, evaluating the effects of equivalence ratios, fuel compositions, flow velocities, and discharge parameters through experimental measurements and data analysis. The MIE of NH3/air mixtures varied non-monotonically with the equivalence ratio, reaching a minimum near an equivalence ratio of 0.85. The flame kernel area and chemiluminescence intensities of NH3/air flames also showed a tendency to increase and then decrease as the equivalence ratio increased on the lean side. For NH3/C2H4/air mixtures, higher flow velocities and greater ammonia fractions increased the MIE due to enhanced convective heat losses and reduced chemical reactivity. The flame propagation process was divided into four stages: ignition, quasi-steady-state development, wall-touch propagation, and outflow. In the fully coupled state, at lower discharge frequencies and larger pulse numbers, flame kernel growth was significantly enhanced. However, a saturation point was reached beyond which additional pulses or increasing frequencies did not notably change the kernel size. This study provides critical insights into plasma-assisted ignition and flame propagation under flowing conditions for ammonia-containing fuels, contributing to the advancement of low-carbon combustion technologies.
KW - Ammonia
KW - Flame kernel propagation
KW - Flowing ignition
KW - Minimum ignition energy (MIE)
KW - Nanosecond pulsed discharges
UR - https://www.scopus.com/pages/publications/105020984002
U2 - 10.1016/j.fuel.2025.137369
DO - 10.1016/j.fuel.2025.137369
M3 - 文章
AN - SCOPUS:105020984002
SN - 0016-2361
VL - 407
JO - Fuel
JF - Fuel
M1 - 137369
ER -