High-throughput Dry and Minimum Quantity Lubrication Drilling of Compacted Graphite Iron

Ali T. Kuzu; Wenwu Wu; David A. Stephenson; Mustafa Bakkal; Jun Hong; Albert J. Shih

doi:10.1016/j.procir.2016.03.191

High-throughput Dry and Minimum Quantity Lubrication Drilling of Compacted Graphite Iron

Ali T. Kuzu
, Wenwu Wu
, David A. Stephenson
, Mustafa Bakkal
, Jun Hong
, Albert J. Shih

机械工程学院

University of Michigan, Ann Arbor
Istanbul Technical University
Xi'an Jiaotong University
Ford Motor Company

科研成果: 期刊稿件 › 会议文章 › 同行评审

5 引用（Scopus）

摘要

This research investigates the high-throughput drilling of the compacted graphite iron (CGI), a high strength, lightweight material for automotive powertrain applications, at 26.5 mm/s feed rate using 4 mm diameter coated carbide drill. The CGI drilling experiments show that maximum 1740, 3150 and 2948 holes were drilled in two repeated tests under the dry, dry with through-the-drill compressed air, and minimum quantity lubrication (MQL) conditions. The Joule-Thomson cooling effect due to expansion of high pressure air from holes at the drill tip and mechanical effect of chip formation and evacuation are studied. Results demonstrate that high-throughput sustainable dry drilling of CGI is technically feasible.

源语言	英语
页（从-至）	87-90
页数	4
期刊	Procedia CIRP
卷	46
DOI	https://doi.org/10.1016/j.procir.2016.03.191
出版状态	已出版 - 2016
活动	7th CIRP Conference on High Performance Cutting, HPC 2016 - Chemnitz, 德国期限: 31 5月 2016 → 2 6月 2016

访问文件

10.1016/j.procir.2016.03.191

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{ebf1fe4d7c6c471ba5b06b3c2b0d512c,

title = "High-throughput Dry and Minimum Quantity Lubrication Drilling of Compacted Graphite Iron",

abstract = "This research investigates the high-throughput drilling of the compacted graphite iron (CGI), a high strength, lightweight material for automotive powertrain applications, at 26.5 mm/s feed rate using 4 mm diameter coated carbide drill. The CGI drilling experiments show that maximum 1740, 3150 and 2948 holes were drilled in two repeated tests under the dry, dry with through-the-drill compressed air, and minimum quantity lubrication (MQL) conditions. The Joule-Thomson cooling effect due to expansion of high pressure air from holes at the drill tip and mechanical effect of chip formation and evacuation are studied. Results demonstrate that high-throughput sustainable dry drilling of CGI is technically feasible.",

keywords = "Chip, Drilling, Productivity, Wear",

author = "Kuzu, \{Ali T.\} and Wenwu Wu and Stephenson, \{David A.\} and Mustafa Bakkal and Jun Hong and Shih, \{Albert J.\}",

note = "Publisher Copyright: {\textcopyright} 2016 The Authors.; 7th CIRP Conference on High Performance Cutting, HPC 2016 ; Conference date: 31-05-2016 Through 02-06-2016",

year = "2016",

doi = "10.1016/j.procir.2016.03.191",

language = "英语",

volume = "46",

pages = "87--90",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - High-throughput Dry and Minimum Quantity Lubrication Drilling of Compacted Graphite Iron

AU - Kuzu, Ali T.

AU - Wu, Wenwu

AU - Stephenson, David A.

AU - Bakkal, Mustafa

AU - Hong, Jun

AU - Shih, Albert J.

PY - 2016

Y1 - 2016

N2 - This research investigates the high-throughput drilling of the compacted graphite iron (CGI), a high strength, lightweight material for automotive powertrain applications, at 26.5 mm/s feed rate using 4 mm diameter coated carbide drill. The CGI drilling experiments show that maximum 1740, 3150 and 2948 holes were drilled in two repeated tests under the dry, dry with through-the-drill compressed air, and minimum quantity lubrication (MQL) conditions. The Joule-Thomson cooling effect due to expansion of high pressure air from holes at the drill tip and mechanical effect of chip formation and evacuation are studied. Results demonstrate that high-throughput sustainable dry drilling of CGI is technically feasible.

AB - This research investigates the high-throughput drilling of the compacted graphite iron (CGI), a high strength, lightweight material for automotive powertrain applications, at 26.5 mm/s feed rate using 4 mm diameter coated carbide drill. The CGI drilling experiments show that maximum 1740, 3150 and 2948 holes were drilled in two repeated tests under the dry, dry with through-the-drill compressed air, and minimum quantity lubrication (MQL) conditions. The Joule-Thomson cooling effect due to expansion of high pressure air from holes at the drill tip and mechanical effect of chip formation and evacuation are studied. Results demonstrate that high-throughput sustainable dry drilling of CGI is technically feasible.

KW - Chip

KW - Drilling

KW - Productivity

KW - Wear

UR - https://www.scopus.com/pages/publications/84978804179

U2 - 10.1016/j.procir.2016.03.191

DO - 10.1016/j.procir.2016.03.191

M3 - 会议文章

AN - SCOPUS:84978804179

SN - 2212-8271

VL - 46

SP - 87

EP - 90

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 7th CIRP Conference on High Performance Cutting, HPC 2016

Y2 - 31 May 2016 through 2 June 2016

ER -

High-throughput Dry and Minimum Quantity Lubrication Drilling of Compacted Graphite Iron

摘要

访问文件

其它文件与链接

学术指纹

引用此