跳到主要导航 跳到搜索 跳到主要内容

High pressure synthesis of tungsten carbide–cubic boron nitride (WC–cBN) composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

  • Jiakun Wu
  • , Haikuo Wang
  • , Chao Wang
  • , Yao Tang
  • , Zhiqiang Hou
  • , Shun Wan
  • , Binghe Liu
  • , Dazhuan Wu
  • , Bin Chen
  • , Zhongjun Tan
  • , Xiaoping Ouyang
  • Zhejiang University
  • Xianghu High Tech Application Research Institute
  • Center for High Pressure Science & Technology Advanced Research
  • State Key Laboratory of Cemented Carbide

科研成果: 期刊稿件 › 文章 › 同行评审

15 引用 (Scopus)

摘要

Tungsten carbide (WC) with different amounts of Cubic boron nitride (cBN) were synthesized by High Pressure-High Temperature (HPHT) method. The mapping correlation between thermodynamic condition, cBN addition, and microstructure, mechanical properties of WC–cBN composites was established and analyzed by response surface methodology. The main factors affecting the properties of composites were identified by ANOVA. The optimum thermodynamic condition was calculated. It was found that a minor phase transformation of cBN into the low-hardness hBN occurred at a temperature of 1300 °C and intensified at 1500 °C. The homogeneously dispersed cBN particles in the WC matrix promoted an improvement of hardness and fracture toughness, but the phase transition of cBN and its truss effect can dramatically reduce the mechanical properties. The Vickers hardness and fracture toughness of the well-sintered WC-cBN bulks reached a high value of 34 GPa and 13.6 MPa·m1/2, which are improved by 17% and 52% respectively compared with the pure WC samples sintered under similar high-pressure level.

源语言英语
页(从-至)4503-4512
页数10
期刊Journal of the European Ceramic Society
卷42
期11
DOI
出版状态已出版 - 9月 2022
已对外发布是

学术指纹

探究 'High pressure synthesis of tungsten carbide–cubic boron nitride (WC–cBN) composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties' 的科研主题。它们共同构成独一无二的学术指纹。

引用此