Hardware implementation of a four-terminal HVDC test-bed

Yalong Li; Xiaojie Shi; Bo Liu; Fred Wang; Leon M. Tolbert; Wanjun Lei

doi:10.1109/ECCE.2015.7310414

Hardware implementation of a four-terminal HVDC test-bed

Yalong Li
, Xiaojie Shi
, Bo Liu
, Fred Wang
, Leon M. Tolbert
, Wanjun Lei

电气工程学院

University of Tennessee

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

6 引用（Scopus）

摘要

This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.

源语言	英语
主期刊名	2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015
出版商	Institute of Electrical and Electronics Engineers Inc.
页	5363-5370
页数	8
ISBN（电子版）	9781467371506
DOI	https://doi.org/10.1109/ECCE.2015.7310414
出版状态	已出版 - 27 10月 2015
活动	7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015 - Montreal, 加拿大期限: 20 9月 2015 → 24 9月 2015

出版系列

姓名	2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015

会议

会议	7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015
国家/地区	加拿大
市	Montreal
时期	20/09/15 → 24/09/15

访问文件

10.1109/ECCE.2015.7310414

其它文件与链接

链接到 Scopus 的出版物

引用此

Li, Y., Shi, X., Liu, B., Wang, F., Tolbert, L. M., & Lei, W. (2015). Hardware implementation of a four-terminal HVDC test-bed. 在 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015 (页码 5363-5370). 文章 7310414 (2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ECCE.2015.7310414

@inproceedings{a0d01c6a4b2147f4a5568c509ede011c,

title = "Hardware implementation of a four-terminal HVDC test-bed",

abstract = "This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.",

author = "Yalong Li and Xiaojie Shi and Bo Liu and Fred Wang and Tolbert, \{Leon M.\} and Wanjun Lei",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015 ; Conference date: 20-09-2015 Through 24-09-2015",

year = "2015",

month = oct,

day = "27",

doi = "10.1109/ECCE.2015.7310414",

language = "英语",

series = "2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "5363--5370",

booktitle = "2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015",

}

Li, Y, Shi, X, Liu, B, Wang, F, Tolbert, LM & Lei, W 2015, Hardware implementation of a four-terminal HVDC test-bed. 在 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015., 7310414, 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015, Institute of Electrical and Electronics Engineers Inc., 页码 5363-5370, 7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015, Montreal, 加拿大, 20/09/15. https://doi.org/10.1109/ECCE.2015.7310414

Hardware implementation of a four-terminal HVDC test-bed. / Li, Yalong; Shi, Xiaojie; Liu, Bo 等.
2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015. Institute of Electrical and Electronics Engineers Inc., 2015. 页码 5363-5370 7310414 (2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Hardware implementation of a four-terminal HVDC test-bed

AU - Li, Yalong

AU - Shi, Xiaojie

AU - Liu, Bo

AU - Wang, Fred

AU - Tolbert, Leon M.

AU - Lei, Wanjun

PY - 2015/10/27

Y1 - 2015/10/27

N2 - This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.

AB - This paper presents the implementation of a scaled 4-terminal high-voltage direct current (HVDC) test-bed. The hardware construction, control scheme and communication architecture are described. The typical scenarios such as system start-up, station online recommission, power variation, online mode transition and station failure are emulated in the test-bed. A dc line current control is proposed to allow online disconnecting dc lines by using HVDC disconnectors with low current interrupting capability instead of the expensive dc circuit breaker. This control can be further utilized for dc line current limiting function. When a dc line is overloaded, the line current control will be automatically activated to regulate current below the allowable maximum value.

UR - https://www.scopus.com/pages/publications/84963626565

U2 - 10.1109/ECCE.2015.7310414

DO - 10.1109/ECCE.2015.7310414

M3 - 会议稿件

AN - SCOPUS:84963626565

T3 - 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015

SP - 5363

EP - 5370

BT - 2015 IEEE Energy Conversion Congress and Exposition, ECCE 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 7th Annual IEEE Energy Conversion Congress and Exposition, ECCE 2015

Y2 - 20 September 2015 through 24 September 2015

ER -

Hardware implementation of a four-terminal HVDC test-bed

摘要

出版系列

会议

访问文件

其它文件与链接

学术指纹

引用此