@inproceedings{353b7b72231748f1b3ec3ac6e03bd0e4,
title = "Friction and wear properties of oriented Fe2B with different cr additions under water-lubricated condition",
abstract = "In the present study, pure oriented Fe2B with Cr addition were prepared. The friction and wear properties of oriented Fe2B with different Cr additions were investigated by optical microscopy, scanning electron microscopy and 3D laser scanning microscope. Results indicate that fracture toughness of the cross section is higher than that of the longitudinal section invariably with the same Cr addition. Both cross and longitudinal sections, the fracture toughness value increases from 1Cr to 2Cr and decreases from 2Cr to 3Cr. Friction coefficient and wear loss of cross section are lower than those of the longitudinal section under the same Cr addition. For the identical grain orientation, the friction coefficient and wear loss rise from 1Cr to 2Cr and then drop from 2Cr to 3Cr. 2Cr-C sample has the lowest friction coefficient and wear loss. On the contrary, the friction coefficient and wear loss of 3Cr-L sample are the highest. Wear mechanisms of Fe2B alloy are brittle rupture and abrasive wear.",
keywords = "Cr addition, Friction, Oriented FeB, Water-lubricated condition",
author = "Kemin Li and Zhifu Huang and Chaofeng Qin and Hanwen Ma and Weiyao Zhang",
note = "Publisher Copyright: {\textcopyright} 2020 Trans Tech Publications Ltd, Switzerland.; 7th Asia Conference on Mechanical and Materials Engineering, ACMME 2019 ; Conference date: 14-06-2019 Through 17-06-2019",
year = "2020",
doi = "10.4028/www.scientific.net/MSF.975.3",
language = "英语",
isbn = "9783035716207",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "3--8",
editor = "Es-Said, \{Omar S.\}",
booktitle = "7th Asia Conference on Mechanical and Materials Engineering",
}