跳到主要导航 跳到搜索 跳到主要内容

Failure behaviors of vacuum plasma sprayed tungsten coatings for plasma facing application

  • F. L. Chong
  • , J. L. Chen
  • , J. G. Li
  • , X. B. Zheng
  • Xuzhou Institute of Technology
  • CAS - Institute of Plasma Physics
  • CAS - Shanghai Institute of Ceramics

科研成果: 期刊稿件 › 文章 › 同行评审

13 引用 (Scopus)

摘要

About 1 mm vacuum plasma sprayed tungsten (VPS-W) coatings were fabricated on the copper chromium zirconium (CuCrZr) alloys substrate. The failure behaviors were studied by means of the steady state and transient heat load using the electron beam facility and the Nd: YAG laser, respectively. The results indicated that the columnar crystals grew up and then micro-cracks between the lamellar layers were observed. Macro-cracks and delamination appeared with the fatigue cycles increase. Finally, the coating failed. The surface cracks were also observed and propagated during the fatigue tests. The failure behaviors of the transient heat load are as follows: the homogeneous melting and micro-cracks, melting tungsten ejection which enhanced the erosion of tungsten due to the splash and evaporation. In addition, the physical properties of W coatings such as porosity, Vickers hardness were degraded. The roughing phenomenon was not easy to be observed due to the rough surface characteristic of VPS-W coatings.

源语言英语
页(从-至)780-783
页数4
期刊Journal of Nuclear Materials
卷386-388
期C
DOI
出版状态已出版 - 30 4月 2009

学术指纹

探究 'Failure behaviors of vacuum plasma sprayed tungsten coatings for plasma facing application' 的科研主题。它们共同构成独一无二的学术指纹。

引用此