Fabrication of NbTi superconducting joints for 400-MHz NMR application

Junsheng Cheng; Jianhua Liu; Zhipeng Ni; Chunyan Cui; Shunzhong Chen; Shousen Song; Lankai Li; Yinming Dai; Qiuliang Wang

doi:10.1109/TASC.2012.2185795

Fabrication of NbTi superconducting joints for 400-MHz NMR application

Junsheng Cheng
, Jianhua Liu
, Zhipeng Ni
, Chunyan Cui
, Shunzhong Chen
, Shousen Song
, Lankai Li
, Yinming Dai
, Qiuliang Wang

电气工程学院

CAS - Institute of Electrical Engineering

科研成果: 期刊稿件 › 文章 › 同行评审

35 引用（Scopus）

摘要

NbTi superconducting joints (SJs) for a 400-MHz nuclear magnetic resonance (NMR) magnet system were fabricated using the superconducting solder matrix replacement in an open-air condition. A detection device for testing the resistance of SJ has been established. The results show that the overall resistance of SJs is 9.58 × 10 ^-12 Ω under the background field of 1 T by summation of individual joint resistance. The resistance of SJs and the capability for current load should meet the demands of the NMR system. The SJs are placed inside the cylindrical vessel above the magnet. The magnetic flux inside the top of the vessel is no more than 0.3 T to assure performance of joints. As results, there is only 0.0001 ppm for homogeneity deviation caused by SJs on this NMR system, and therefore, the negative effect is negligible.

源语言	英语
期刊论文编号	6164226
期刊	IEEE Transactions on Applied Superconductivity
卷	22
期	2
DOI	https://doi.org/10.1109/TASC.2012.2185795
出版状态	已出版 - 4月 2012

访问文件

10.1109/TASC.2012.2185795

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{89129b194f374200bd47014149f6fb26,

title = "Fabrication of NbTi superconducting joints for 400-MHz NMR application",

abstract = "NbTi superconducting joints (SJs) for a 400-MHz nuclear magnetic resonance (NMR) magnet system were fabricated using the superconducting solder matrix replacement in an open-air condition. A detection device for testing the resistance of SJ has been established. The results show that the overall resistance of SJs is 9.58 {\texttimes} 10 -12 Ω under the background field of 1 T by summation of individual joint resistance. The resistance of SJs and the capability for current load should meet the demands of the NMR system. The SJs are placed inside the cylindrical vessel above the magnet. The magnetic flux inside the top of the vessel is no more than 0.3 T to assure performance of joints. As results, there is only 0.0001 ppm for homogeneity deviation caused by SJs on this NMR system, and therefore, the negative effect is negligible.",

keywords = "Nuclear magnetic resonance (NMR) spectrometer, solder, superconducting joint (SJ), superconducting magnet",

author = "Junsheng Cheng and Jianhua Liu and Zhipeng Ni and Chunyan Cui and Shunzhong Chen and Shousen Song and Lankai Li and Yinming Dai and Qiuliang Wang",

year = "2012",

month = apr,

doi = "10.1109/TASC.2012.2185795",

language = "英语",

volume = "22",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2",

}

TY - JOUR

T1 - Fabrication of NbTi superconducting joints for 400-MHz NMR application

AU - Cheng, Junsheng

AU - Liu, Jianhua

AU - Ni, Zhipeng

AU - Cui, Chunyan

AU - Chen, Shunzhong

AU - Song, Shousen

AU - Li, Lankai

AU - Dai, Yinming

AU - Wang, Qiuliang

PY - 2012/4

Y1 - 2012/4

N2 - NbTi superconducting joints (SJs) for a 400-MHz nuclear magnetic resonance (NMR) magnet system were fabricated using the superconducting solder matrix replacement in an open-air condition. A detection device for testing the resistance of SJ has been established. The results show that the overall resistance of SJs is 9.58 × 10 -12 Ω under the background field of 1 T by summation of individual joint resistance. The resistance of SJs and the capability for current load should meet the demands of the NMR system. The SJs are placed inside the cylindrical vessel above the magnet. The magnetic flux inside the top of the vessel is no more than 0.3 T to assure performance of joints. As results, there is only 0.0001 ppm for homogeneity deviation caused by SJs on this NMR system, and therefore, the negative effect is negligible.

AB - NbTi superconducting joints (SJs) for a 400-MHz nuclear magnetic resonance (NMR) magnet system were fabricated using the superconducting solder matrix replacement in an open-air condition. A detection device for testing the resistance of SJ has been established. The results show that the overall resistance of SJs is 9.58 × 10 -12 Ω under the background field of 1 T by summation of individual joint resistance. The resistance of SJs and the capability for current load should meet the demands of the NMR system. The SJs are placed inside the cylindrical vessel above the magnet. The magnetic flux inside the top of the vessel is no more than 0.3 T to assure performance of joints. As results, there is only 0.0001 ppm for homogeneity deviation caused by SJs on this NMR system, and therefore, the negative effect is negligible.

KW - Nuclear magnetic resonance (NMR) spectrometer

KW - solder

KW - superconducting joint (SJ)

KW - superconducting magnet

UR - https://www.scopus.com/pages/publications/84862805270

U2 - 10.1109/TASC.2012.2185795

DO - 10.1109/TASC.2012.2185795

M3 - 文章

AN - SCOPUS:84862805270

SN - 1051-8223

VL - 22

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 2

M1 - 6164226

ER -

Fabrication of NbTi superconducting joints for 400-MHz NMR application

摘要

访问文件

其它文件与链接

学术指纹

引用此