Fabrication and enhanced degradation behavior of sinterless porous apatite scaffolds with centrosymmetric structure

The primary component of natural bone minerals, hydroxyapatite (HA), has been the subject of research on materials for bone implants. Sintered HA scaffolds, on the other hand, degrade slowly after implantation and exhibit a high degree of crystallization at high temperatures, making it challenging to match the rate at which new bone grows. In this study, the benefit of self-curing calcium phosphate bone cement was employed to create porous apatite scaffolds without sintering. The lamellar pore structure was created by directional freeze-casting, and the enhanced specific surface area aided the in-situ hydration process. The crystallinity of sinterless porous apatite scaffolds diminishes when the TTCP and DCPD molar ratios drop. When the molar ratio is adjusted to 1:2.25, the crystallinity of the fabricated scaffold is reduced to 63.99 %, and 10.21 % can be degraded in 30 days. The degradation of porous scaffolds in simulated body fluids mainly depends on the rapid dissolution and transformation of solid phase powders in the early hydration reaction and the slow diffusion of the apatite in the later stage. The compressive strength of the porous scaffold is 5.3 MPa and its elastic modulus is 0.68 GPa. After 14 days of degradation, the compressive strength was 4.0 MPa and the elastic modulus was 0.64 GPa, which was still within the applicable range of cancellous bone repair. It has a promising application prospect as a substitute scaffold for absorbable cancellous bone.