Experimental study on surface temperature and emissivity of rotating turbine blades of a micro turbojet engine

The temperature of the rotating turbine blades of a turbojet engine must be known to assess the combustion state and improve turbine blade quality. Obtaining online temperature measurements of high-speed rotating turbine blades in high-temperature gas flow remains challenging. A multispectral radiation thermometry method without emissivity assumption is proposed to measure the temperature of high-speed rotating turbine blades of a micro turbojet engine. The relative radiative intensity is calculated by accounting for smooth changes in the wavelength using the moving narrowband method to determine the influence of emissivity on multispectral radiation thermometry results. The method's performance in measuring the surface temperature of high-speed rotating objects is tested. The wavelength range of 970 nm to 1700 nm is selected because the radiation from gases is weaker in comparison to the radiation emitted by solid surfaces within this band. The spectral radiation of the turbine blade surface is measured at three rotational speeds: 38,000 r/min, 48,000 r/min, and 58,000 r/min. The results show that, unlike thermocouples that measure the temperature of the hot gas flow near the blade, multispectral radiation thermometry provides the average surface temperature with high consistency (with a deviation smaller than 50 K). Multispectral radiation thermometry can be applied to measure the surface temperature and emissivity of high-speed rotating objects, such as the blades of turbojet engines.