TY - GEN
T1 - Experimental study on ALN/H2O and AL2O3/H2O nanofluid flow boiling heat transfer and its influence factors in a vertical tube
AU - Wang, Y.
AU - Deng, K. H.
AU - Liu, B.
AU - Wu, J. M.
AU - Su, G. H.
N1 - Publisher Copyright:
Copyright © 2016 by ASME.
PY - 2016
Y1 - 2016
N2 - In this work, AlN/H2O and Al2O3/H2O nanofluid was prepared by an ultrasonic oscillation. Moreover, saturated flow boiling heat transfer in a vertical tube is experimentally investigated by nanofluid, with 0.1% volume concentration and 30nm diameter for AlN and 20nm diameter for γAl2O3.Several factors are under consideration, including heat flux on the heating surface (48-289kW·m-2), pressure (0.2-0.8Mpa) and mass flow rate (350-1100 kg·m-2·s-1). The results show that the saturated flow boiling heat transfer of AlN/H2O nanofluid is improved mostly about 64% compared with deionized water and Al2O3/H2O nanofluid is improved mostly about 61% compared with deionized water, and the average Nusselt number enhancement rates of nanofluid compared with deionized water are 23% for Al2O3/H2O nanofluid and 31% for Al2O3/H2O nanofluid in the range of this work. Furthermore, the heat transfer capacity of nanofluid increases with increasing heat flux on the heating surface and pressure. It is proved that nanoparticle deposited on the heating surface by SEM observations and TEM observations for nanoparticle confirm that nanoparticle does not change obviously after boiling. In addition, the enhancement rate of nanofluid saturated flow boiling heat transfer capacity increases with increasing pressure, but the influence of mass flow rate is negligible. In this study, as the thermal conductivity of AlN is greater than that of Al2O3, the heat transfer capacity of AlN/H2O nanofluid is greater than that of Al2O3/H2O nanofluid under the same conditions.
AB - In this work, AlN/H2O and Al2O3/H2O nanofluid was prepared by an ultrasonic oscillation. Moreover, saturated flow boiling heat transfer in a vertical tube is experimentally investigated by nanofluid, with 0.1% volume concentration and 30nm diameter for AlN and 20nm diameter for γAl2O3.Several factors are under consideration, including heat flux on the heating surface (48-289kW·m-2), pressure (0.2-0.8Mpa) and mass flow rate (350-1100 kg·m-2·s-1). The results show that the saturated flow boiling heat transfer of AlN/H2O nanofluid is improved mostly about 64% compared with deionized water and Al2O3/H2O nanofluid is improved mostly about 61% compared with deionized water, and the average Nusselt number enhancement rates of nanofluid compared with deionized water are 23% for Al2O3/H2O nanofluid and 31% for Al2O3/H2O nanofluid in the range of this work. Furthermore, the heat transfer capacity of nanofluid increases with increasing heat flux on the heating surface and pressure. It is proved that nanoparticle deposited on the heating surface by SEM observations and TEM observations for nanoparticle confirm that nanoparticle does not change obviously after boiling. In addition, the enhancement rate of nanofluid saturated flow boiling heat transfer capacity increases with increasing pressure, but the influence of mass flow rate is negligible. In this study, as the thermal conductivity of AlN is greater than that of Al2O3, the heat transfer capacity of AlN/H2O nanofluid is greater than that of Al2O3/H2O nanofluid under the same conditions.
KW - Flow boiling
KW - Heat transfer enhancement
KW - Influence factors
KW - Nanofluid
UR - https://www.scopus.com/pages/publications/84995666041
U2 - 10.1115/ICONE24-60496
DO - 10.1115/ICONE24-60496
M3 - 会议稿件
AN - SCOPUS:84995666041
SN - 9784888982566
T3 - International Conference on Nuclear Engineering, Proceedings, ICONE
BT - Thermal-Hydraulics
PB - American Society of Mechanical Engineers (ASME)
T2 - 2016 24th International Conference on Nuclear Engineering, ICONE 2016
Y2 - 26 June 2016 through 30 June 2016
ER -