跳到主要导航 跳到搜索 跳到主要内容

Evaporation and pressure shock characteristics of wet steam jet submerged in molten lead-bismuth eutectic

  • Xi'an Jiaotong University

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

The accident of steam generator tube rupture (SGTR) is one of the key scientific issues in the safety analysis of lead-cooled fast reactors (LFRs). It could lead to leakage of high-pressure steam and water into the molten metal and endanger the safe operation of the reactor. Due to the limited direct research on wet steam jets submerged in molten lead-bismuth eutectic (LBE), a transient numerical model was set up to investigate the multi-phase flow process with a complex heat and mass transfer mechanism. Only one flow pattern was found for the studied conditions, and it was similar to the continuous-jets in the superheated steam-LBE jets, and the jet parameters were larger for the wet steam-LBE jets, where the jet bubble volume could be a maximum of 3.27 times larger. The liquid water in the jets was found to evaporate quickly near the nozzle area, leaving only a small amount of liquid after the nozzle. And there were a water core area and a steam layer area along the radial direction. Besides, the sensible heat of the jet itself was found to contribute to a considerable proportion of the overall phase change heat, which could take up as high as 49.4%. Both initial and quasi-back-attack pressure shocks were observed, but the convergent-divergent pseudo-nozzle theory was not applicable under low pressures, due to the compressibility and density differences of the steam brought by the large content of liquid water.

源语言英语
期刊论文编号129539
期刊International Journal of Heat and Mass Transfer
卷272
DOI
出版状态已出版 - 1月 2027

学术指纹

探究 'Evaporation and pressure shock characteristics of wet steam jet submerged in molten lead-bismuth eutectic' 的科研主题。它们共同构成独一无二的学术指纹。

引用此