TY - JOUR
T1 - Effect of the spray bars on droplet dispersion and heat transfer in an icing wind tunnel
AU - Wei, Ren
AU - Guan, Bo
AU - Zhang, Haibin
AU - Bai, Bofeng
N1 - Publisher Copyright:
© 2026 Elsevier Ltd.
PY - 2026/8
Y1 - 2026/8
N2 - An icing wind tunnel (IWT) is a key ground-based simulation facility for investigating aircraft icing mechanisms and anti-icing and de-icing technologies. Its primary objective and design challenge is to accurately replicate real icing conditions. This paper employs numerical simulations to examine a full-scale IWT with realistic spray bar geometries, systematically investigating the diffusion and spatial distribution of atomized droplets, the heat transfer characteristics between droplets and low-temperature airflow, as well as the freezing behavior of droplets under various operating conditions. The results indicate that turbulent vortex structures generated by the spray bars are weakened during the acceleration and flow-rectifying process in the contraction section, while the vortex intensity gradually increases again in the test section. These turbulent vortices significantly influence droplet diffusion and heat exchange with the airflow. Moreover, the diameter of the atomized droplets is a critical parameter affecting the temperature and velocity differences between the gas and droplets in the test section. A notable temperature drop in the contraction section leads to a rapid decrease in droplet temperature and subsequent freezing of a portion of the droplets, a phenomenon that is more evident at lower airflow humidity. Finally, a multi-dimensional model is proposed to quantitatively evaluate the uniformity of droplet distribution in the IWT test section. The findings contribute to a deeper understanding of the gas-liquid two-phase flow and heat transfer mechanisms in low-temperature wind tunnels and provide valuable insights for the design of the IWTs.
AB - An icing wind tunnel (IWT) is a key ground-based simulation facility for investigating aircraft icing mechanisms and anti-icing and de-icing technologies. Its primary objective and design challenge is to accurately replicate real icing conditions. This paper employs numerical simulations to examine a full-scale IWT with realistic spray bar geometries, systematically investigating the diffusion and spatial distribution of atomized droplets, the heat transfer characteristics between droplets and low-temperature airflow, as well as the freezing behavior of droplets under various operating conditions. The results indicate that turbulent vortex structures generated by the spray bars are weakened during the acceleration and flow-rectifying process in the contraction section, while the vortex intensity gradually increases again in the test section. These turbulent vortices significantly influence droplet diffusion and heat exchange with the airflow. Moreover, the diameter of the atomized droplets is a critical parameter affecting the temperature and velocity differences between the gas and droplets in the test section. A notable temperature drop in the contraction section leads to a rapid decrease in droplet temperature and subsequent freezing of a portion of the droplets, a phenomenon that is more evident at lower airflow humidity. Finally, a multi-dimensional model is proposed to quantitatively evaluate the uniformity of droplet distribution in the IWT test section. The findings contribute to a deeper understanding of the gas-liquid two-phase flow and heat transfer mechanisms in low-temperature wind tunnels and provide valuable insights for the design of the IWTs.
KW - Droplet dispersion
KW - Gas-liquid two-phase flow
KW - Heat and mass transfer
KW - Icing wind tunnel
KW - Spray bars
UR - https://www.scopus.com/pages/publications/105045155232
U2 - 10.1016/j.applthermaleng.2026.132384
DO - 10.1016/j.applthermaleng.2026.132384
M3 - 文章
AN - SCOPUS:105045155232
SN - 1359-4311
VL - 303
JO - Applied Thermal Engineering
JF - Applied Thermal Engineering
M1 - 132384
ER -