跳到主要导航 跳到搜索 跳到主要内容

Effect of ribs on heat transfer and pressure drop in a u-bend channel with double-layer, dome-shaped turning vanes

  • Xi'an Jiaotong University

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

1 引用 (Scopus)

摘要

In this paper, the combined effects of ribs and double-layer, dome-shaped turning vanes on heat transfer and pressure drop are investigated in an idealized U-bend channel. Five kinds of ribs including transverse ribs, 45°ribs, 135°ribs, V-shaped ribs, and reverse V-shaped ribs combined with one kind of double-layer, dome-shaped turning vanes are applied. Baseline results are compared with the above composite cooling structures. Numerical simulations are performed by solving 3D, steady Reynolds-averaged Navier-Stokes (RANS) equations with k-ω turbulence model. The channel aspect ratio is 1:2 and its hydraulic diameter is 93.13 mm, respectively. Based on the cooling air inlet velocity and the channel inlet hydraulic diameter, the inlet Reynolds numbers are ranging from 100,000 to 440,000. The detailed three-dimensional fluid flow, pressure and heat transfer distributions are presented. Moreover, the thermal performances of the U-bend channel are also evaluated and compared with different cases. The results revealed that combined with the double-layer, dome-shaped turning vanes, the transverse ribs case has the best thermal performance at the tip wall, and the reverse V-shaped ribs case is the best for the leading wall. The pressure drop of the channel with double-layer, dome-shaped turning vanes without any rib turbulator is the lowest, and that of the channel with inclined ribs is significantly higher than that of the channel with transverse ribs. The superposition of the secondary flow induced by the ribs and the Dean vortex induced by the 180°sharp turn has a marked impact on the flow and heat transfer in the channel. In the double-layer, dome-shaped turning vanes channel, the mass flow distribution of the coolant also affects the heat transfer on the tip wall of the channel, and the ribs can adjust the mass flow distribution. The helical vortex superposed by the mainstream flow and the secondary flow induced by the ribs represents typical flow phenomenon in ribbed channels. The flow and development of the helical vortex are the main factors affecting the heat transfer on the leading/trailing walls.

源语言英语
主期刊名Heat Transfer
出版商American Society of Mechanical Engineers (ASME)
ISBN(电子版)9780791884164
DOI
出版状态已出版 - 2020
活动ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020 - Virtual, Online
期限: 21 9月 2020 → 25 9月 2020

丛书

姓名Proceedings of the ASME Turbo Expo
卷7A-2020

会议

会议ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, GT 2020
市Virtual, Online
时期21/09/20 → 25/09/20

学术指纹

探究 'Effect of ribs on heat transfer and pressure drop in a u-bend channel with double-layer, dome-shaped turning vanes' 的科研主题。它们共同构成独一无二的学术指纹。

引用此