跳到主要导航 跳到搜索 跳到主要内容

Effect of microsegregation behaviors on solidification microstructure of IC10 superalloy fabricated by directed energy deposition

  • Jiawei Wang
  • , Huaming Wang
  • , Hongwei Gao
  • , Xu Cheng
  • , Dong Liu
  • , Meiling Zhang
  • , Shuquan Zhang
  • Beihang University
  • National Engineering Laboratory of Additive Manufacturing for Large Metallic Components

科研成果: 期刊稿件 › 文章 › 同行评审

20 引用 (Scopus)

摘要

Due to the solidification process and thermal history, the microstructure and properties along the deposition direction are generally inhomogeneous in components fabricated by the directed energy deposition technique. By developing a microsegregation model, this study gives an innovative understanding of the elemental segregation behavior of an as-deposited IC10 superalloy along the different heights and its influence on the microstructure. Results indicate that the γ-γ ´ eutectic-free microstructure is only obtained at the initial deposition layer, and as the deposition height increases, eutectic phases gradually appear in interdendritic regions. By taking account of the nonequilibrium solidification and dendritic tip undercooling, the new microsegregation model can well explain the segregation behavior of the alloy at different deposition heights. Compared to the back diffusion coefficient, the partition coefficient plays a major role in microsegregation behavior under rapid solidification conditions, especially for the elements with a high diffusion coefficient in solid, such as Ti and Al. Moreover, microstructure transformation is dependent on varying solidification processes due to the change in microsegregation. Limited by the heat transfer efficiency as the increased deposition heights, the temperature gradient and solidification rate decrease, which exacerbates the enrichment of Al and Ti at interdendritic regions and promotes the eutectic phase nucleation. Restricted by the diffusion rate of alloying elements, the eutectic reaction rate slows down, γ and γ ´ lamellae thickness increase, and finally the petal-like eutectic phases form.

源语言英语
期刊论文编号103158
期刊Additive Manufacturing
卷59
DOI
出版状态已出版 - 11月 2022
已对外发布是

学术指纹

探究 'Effect of microsegregation behaviors on solidification microstructure of IC10 superalloy fabricated by directed energy deposition' 的科研主题。它们共同构成独一无二的学术指纹。

引用此