跳到主要导航 跳到搜索 跳到主要内容

Effect of impregnating and heat treatment on microstructure and properties of pressureless sintering AlN/h-BN composite ceramics

  • Xi'an Jiaotong University

科研成果: 期刊稿件 › 文章 › 同行评审

1 引用 (Scopus)

摘要

AlN/20% (volume fraction)h-BN composites were fabricated by pressureless sintering at 1700°C for 2 h. The samples were respectively impregnated into two impregnants of A10 alumina sol and silica sol/phenolic, and then heat-treated at 1450°C for 2 h in nitrogen atmosphere. The relative density, Vickers hardness, flexural strength, microstructure, and phase composition of the ceramics before and after impregnated and heat treated were investigated, and the strengthen mechanism of the composite ceramics was analyzed. The results showed that the Vickers hardness and flexural strength of the samples dipped by the silica sol/phenolic increased significantly, the flexural strength of AlN/20%h-BN increased from 81.5 MPa to 130.1 MPa and the Vickers hardness increased from 1.99 GPa to 3.58 GPa, while the samples dipped by the A10 alumina sol improved slightly. The SiC and aluminum oxynitride were formed homogenously in the pores with the silica sol/phenolic treated samples, which is the main reason to improve the mechanical properties of the samples.

源语言英语
页(从-至)796-799
页数4
期刊Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society
卷40
期6
出版状态已出版 - 6月 2012

学术指纹

探究 'Effect of impregnating and heat treatment on microstructure and properties of pressureless sintering AlN/h-BN composite ceramics' 的科研主题。它们共同构成独一无二的学术指纹。

引用此