Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop

Guanghui Zhou; Zhongdong Xiao; Ben Wang; Pingyu Jiang

doi:10.1109/EMEIT.2011.6023215

Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop

Florida State University

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

摘要

For effectively solving the problem of accurate tracking and control of cutters in digital workshop, this paper presents a novel RFID-based dynamic identifying and tracking framework for cutters in digital workshop (RFID-DITF-CDW). An overall architecture for RFID-DITF-CDW is established and its key enabling technologies including RFID-based realtime information collecting, dynamic misuse detecting of cutter change on CNC machines, real-time position identifying, status tracking, and service life forecasting for cutters are discussed. Finally, a prototype system of RFID-DITF-CDW is developed and applied in a real typical CNC machining workshop to demonstrate the validity of presented framework and enabling technologies.

源语言	英语
主期刊名	Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011
页	800-803
页数	4
DOI	https://doi.org/10.1109/EMEIT.2011.6023215
出版状态	已出版 - 2011
活动	2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011 - Harbin, 中国期限: 12 8月 2011 → 14 8月 2011

出版系列

姓名	Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011
卷	2

会议

会议	2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011
国家/地区	中国
市	Harbin
时期	12/08/11 → 14/08/11

访问文件

10.1109/EMEIT.2011.6023215

其它文件与链接

链接到 Scopus 的出版物

引用此

Zhou, G., Xiao, Z., Wang, B., & Jiang, P. (2011). Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop. 在 Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011 (页码 800-803). 文章 6023215 (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011; 卷 2). https://doi.org/10.1109/EMEIT.2011.6023215

Zhou, Guanghui ; Xiao, Zhongdong ; Wang, Ben 等. / Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop. Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011. 2011. 页码 800-803 (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011).

@inproceedings{7879914046294b6699d6efad6f2ef262,

title = "Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop",

abstract = "For effectively solving the problem of accurate tracking and control of cutters in digital workshop, this paper presents a novel RFID-based dynamic identifying and tracking framework for cutters in digital workshop (RFID-DITF-CDW). An overall architecture for RFID-DITF-CDW is established and its key enabling technologies including RFID-based realtime information collecting, dynamic misuse detecting of cutter change on CNC machines, real-time position identifying, status tracking, and service life forecasting for cutters are discussed. Finally, a prototype system of RFID-DITF-CDW is developed and applied in a real typical CNC machining workshop to demonstrate the validity of presented framework and enabling technologies.",

keywords = "RFID, cutter, dynamic identifying and tracking, misuse detection, service life forecasting",

author = "Guanghui Zhou and Zhongdong Xiao and Ben Wang and Pingyu Jiang",

year = "2011",

doi = "10.1109/EMEIT.2011.6023215",

language = "英语",

isbn = "9781612840857",

series = "Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011",

pages = "800--803",

booktitle = "Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011",

note = "2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011 ; Conference date: 12-08-2011 Through 14-08-2011",

}

Zhou, G , Xiao, Z, Wang, B & Jiang, P 2011, Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop. 在 Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011., 6023215, Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011, 卷 2, 页码 800-803, 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011, Harbin, 中国, 12/08/11. https://doi.org/10.1109/EMEIT.2011.6023215

Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop. / Zhou, Guanghui ; Xiao, Zhongdong; Wang, Ben 等.
Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011. 2011. 页码 800-803 6023215 (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011; 卷 2).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop

AU - Zhou, Guanghui

AU - Xiao, Zhongdong

AU - Wang, Ben

AU - Jiang, Pingyu

PY - 2011

Y1 - 2011

N2 - For effectively solving the problem of accurate tracking and control of cutters in digital workshop, this paper presents a novel RFID-based dynamic identifying and tracking framework for cutters in digital workshop (RFID-DITF-CDW). An overall architecture for RFID-DITF-CDW is established and its key enabling technologies including RFID-based realtime information collecting, dynamic misuse detecting of cutter change on CNC machines, real-time position identifying, status tracking, and service life forecasting for cutters are discussed. Finally, a prototype system of RFID-DITF-CDW is developed and applied in a real typical CNC machining workshop to demonstrate the validity of presented framework and enabling technologies.

AB - For effectively solving the problem of accurate tracking and control of cutters in digital workshop, this paper presents a novel RFID-based dynamic identifying and tracking framework for cutters in digital workshop (RFID-DITF-CDW). An overall architecture for RFID-DITF-CDW is established and its key enabling technologies including RFID-based realtime information collecting, dynamic misuse detecting of cutter change on CNC machines, real-time position identifying, status tracking, and service life forecasting for cutters are discussed. Finally, a prototype system of RFID-DITF-CDW is developed and applied in a real typical CNC machining workshop to demonstrate the validity of presented framework and enabling technologies.

KW - RFID

KW - cutter

KW - dynamic identifying and tracking

KW - misuse detection

KW - service life forecasting

UR - https://www.scopus.com/pages/publications/80053397789

U2 - 10.1109/EMEIT.2011.6023215

DO - 10.1109/EMEIT.2011.6023215

M3 - 会议稿件

AN - SCOPUS:80053397789

SN - 9781612840857

T3 - Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

SP - 800

EP - 803

BT - Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

T2 - 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

Y2 - 12 August 2011 through 14 August 2011

ER -

Zhou G , Xiao Z, Wang B, Jiang P. Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop. 在 Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011. 2011. 页码 800-803. 6023215. (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011). doi: 10.1109/EMEIT.2011.6023215

Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop

摘要

出版系列

会议

访问文件

其它文件与链接

学术指纹

引用此