Corrigendum to “Microfluidic one-step production of zinc oxide nanofluids for enhanced phase change heat transfer in electronics”(Materials Today Nano, (2026), 34, C, (100839), (S258884202600088X), 10.1016/j.mtnano.2026.100839)

The authors regret the errors in the original article. The colour of the line in Fig. 4(a) in the original article was incorrect (Incorrect Fig. 4(a)). Specifically, as shown in the legend, ZnO nanofluids with concentrations of 0.003 wt% and 0.005 wt% were represented by pink and orange lines respectively (Incorrect Fig. 4(a)). However, the colours of the pink and orange lines in Incorrect Fig. 4(a) were reversed, resulting in pink and orange representing ZnO nanofluids with concentrations of 0.005 wt% and 0.003 wt% respectively. Meanwhile, the colours of the basic fluid and ZnO nanofluids with a concentration of 0.001 wt% were reversed (Incorrect Fig. 4(a) ii)). As shown in the legend of Incorrect Fig. 4(a), the basic fluid was represented by the deep blue, and the ZnO nanofluids with a concentration of 0.001 wt% were represented by the light blue. However, the basic fluid was represented by the light blue, and the ZnO nanofluids with a concentration of 0.001 wt% were represented by the deep blue (Incorrect Fig. 4(a) ii)). The correct Fig. 4(a) was provided. The basic fluid, ZnO nanofluids with concentration of 0.001 wt%, 0.003 wt%, 0.005 wt% were represented by deep blue, light blue, pink, and orange. The colours and legend in Fig. 4(a) had been matched and confirmed to be correct after careful inspection. Except for the colour changed in Correct Fig. 4(a), the conclusion analysis and chart questions in original article had not been changed. The authors would like to apologise for any inconvenience caused.(Figure