Cold-sintered V₂O₅-PEDOT:PSS nanocomposites for negative temperature coefficient materials

A low temperature sintering method, namely cold sintering process, was used to prepare 97 vol%V₂O₅-3 vol% PEDOT:PSS (Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate ceramic-polymer nanocomposites. The density, phase purity, microstructure, elemental distribution and electrical properties of sintered tape-cast films were investigated. The composition with 97 vol%V₂O₅-3 vol% PEDOT:PSS ceramic-polymer nanocomposites can be densified (∼90%) after a cold sintering of 140 °C for 45 min under a uniaxial pressure of 300 MPa. The Transmission Electron Microscopy (TEM) microstructure shows that a ∼10 nm thick intergranular polymer of PEDOT:PSS has been distributed around the V₂O₅ grains after cold sintering. The resistivity decreases with temperature increasing, indicating a typical negative temperature coefficient (NTC) characteristic. The resistivity at 25 °C, temperature coefficient α at 25 °C, and B coefficient (material constant) are 6.34 Ωm, −2.4% K⁻¹ and 2153 K, respectively. The V₂O₅-PEDOT:PSS nanocomposite materials are suitable for new NTC devices, with properties that are comparable to traditional NTC materials that are sintered at much higher temperatures and with much more complexed process and compositions.