跳到主要导航 跳到搜索 跳到主要内容

Analysis of flow blockage accidents in rectangular fuel assembly based on CFD methodology

  • Zhenhui Ma
  • , Ronghua Chen
  • , Maolin Tian
  • , Jian Song
  • , Dalin Zhang
  • , G. H. Su
  • , Xiaorong Li
  • , Linglan Zhou
  • , Suizheng Qiu
  • Xi'an Jiaotong University
  • Nuclear Power Institute of China

科研成果: 期刊稿件 › 文章 › 同行评审

33 引用 (Scopus)

摘要

Flow blockage accidents in rectangular fuel assembly were investigated by three-dimensional CFD method in detail. Totally six coolant channels of the fuel assembly were modeled. Meanwhile, in order to make understand of the thermal hydraulic characteristics of the flow blockage accidents comprehensively, three coolant channels which included the obstructed channel were investigated and analyzed thoroughly based on simulation results. RELAP5 calculation was performed here to compare with CFD simulation results under non-blocked condition, and the comparison results indicated approximate agreement of such two types of results. On the basis of the CFD simulation, velocity and temperature profiles were discussed for some typical blockage cases, and conclusion was drawn that the redistribution of the mass flow rates occurred after the formation of the blockage, and due to the formation of obstruction, temperature of the coolant and the fuel increased rapidly which caused higher peak temperature in the blockage channel. Simultaneously, the increasing flow resistance would lead to the existence of jet-flow and reverse flow in the obstructed channel. In addition, DNBR calculation indicated that heat flux on the cladding surface would not exceed critical heat flux, thus DNB would not occur under the investigated situation.

源语言英语
页(从-至)71-83
页数13
期刊Annals of Nuclear Energy
卷112
DOI
出版状态已出版 - 2月 2018

学术指纹

探究 'Analysis of flow blockage accidents in rectangular fuel assembly based on CFD methodology' 的科研主题。它们共同构成独一无二的学术指纹。

引用此