Alloying design of interphase precipitation steel

Deke Shi; Dichen Li; Oingkui Meng; Xiaotian Wang

Alloying design of interphase precipitation steel

Deke Shi
, Dichen Li
, Oingkui Meng
, Xiaotian Wang

Sch of Materials Science and

科研成果: 期刊稿件 › 文章 › 同行评审

2 引用（Scopus）

摘要

A new type of interphase precipitation steel has been developed. On the basis of Fe-1V-0.2C alloy by adding 0.5Al alone and 1.5Mn-0.5Al or 1.5Mn-1.0Si complex, its CCT diagram displaces to shorter time and higher temperature. The steel has the following mechanical properties in air cooling: σ_s>500 Mpa, room charpy value >170 J, and the uniform structure and properties can be achieved up to 150 mm in diameter/thickness. Compared with low carbon bainitic steel, it has much higher toughness. Thus, it is expected to be used directly in as-rolled or normalized.

源语言	英语
页（从-至）	32-37
页数	6
期刊	Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University
卷	28
期	7
出版状态	已出版 - 10月 1994
已对外发布	是

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{bd8813875163468ca1cc984ebdec7e79,

title = "Alloying design of interphase precipitation steel",

abstract = "A new type of interphase precipitation steel has been developed. On the basis of Fe-1V-0.2C alloy by adding 0.5Al alone and 1.5Mn-0.5Al or 1.5Mn-1.0Si complex, its CCT diagram displaces to shorter time and higher temperature. The steel has the following mechanical properties in air cooling: σs>500 Mpa, room charpy value >170 J, and the uniform structure and properties can be achieved up to 150 mm in diameter/thickness. Compared with low carbon bainitic steel, it has much higher toughness. Thus, it is expected to be used directly in as-rolled or normalized.",

author = "Deke Shi and Dichen Li and Oingkui Meng and Xiaotian Wang",

year = "1994",

month = oct,

language = "英语",

volume = "28",

pages = "32--37",

journal = "Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University",

issn = "0253-987X",

publisher = "Xi'an Jiaotong University",

number = "7",

}

TY - JOUR

T1 - Alloying design of interphase precipitation steel

AU - Shi, Deke

AU - Li, Dichen

AU - Meng, Oingkui

AU - Wang, Xiaotian

PY - 1994/10

Y1 - 1994/10

N2 - A new type of interphase precipitation steel has been developed. On the basis of Fe-1V-0.2C alloy by adding 0.5Al alone and 1.5Mn-0.5Al or 1.5Mn-1.0Si complex, its CCT diagram displaces to shorter time and higher temperature. The steel has the following mechanical properties in air cooling: σs>500 Mpa, room charpy value >170 J, and the uniform structure and properties can be achieved up to 150 mm in diameter/thickness. Compared with low carbon bainitic steel, it has much higher toughness. Thus, it is expected to be used directly in as-rolled or normalized.

AB - A new type of interphase precipitation steel has been developed. On the basis of Fe-1V-0.2C alloy by adding 0.5Al alone and 1.5Mn-0.5Al or 1.5Mn-1.0Si complex, its CCT diagram displaces to shorter time and higher temperature. The steel has the following mechanical properties in air cooling: σs>500 Mpa, room charpy value >170 J, and the uniform structure and properties can be achieved up to 150 mm in diameter/thickness. Compared with low carbon bainitic steel, it has much higher toughness. Thus, it is expected to be used directly in as-rolled or normalized.

UR - https://www.scopus.com/pages/publications/0028531022

M3 - 文章

AN - SCOPUS:0028531022

SN - 0253-987X

VL - 28

SP - 32

EP - 37

JO - Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University

JF - Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University

IS - 7

ER -

Alloying design of interphase precipitation steel

摘要

其它文件与链接

学术指纹

引用此