跳到主要导航 跳到搜索 跳到主要内容

A novel method for measuring micro-regional residual stress by nanoindentation

  • Lin Jie Zhang
  • , Yu zhe Ding
  • , Yi chen Yang
  • , Xue Su Zhang
  • , Xue Liang Zeng
  • , Jie Ning
  • State Key Laboratory for Mechanical Behavior of Materials
  • Xi'an Jiaotong University
  • Xi'an University

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

The traditional energy-based models widely adopted for measuring micro-regional residual stress typically yield errors exceeding 60%. In this work, the main cause for serious underestimation of the value of residual stress when using the classical energy-based David model was analyzed. This model approximates residual stress work as ΔP·h max, the product of the maximum load difference ΔP (between stressed and stress-free samples) and maximum indentation depth h max. A modified energy-based Zhang model built on the David model was developed to quantify residual stress work via integration. In the nanoindentation process in the new model, the contact area and the load of the nano-indenter both gradually vary with changes in the penetration depth. David model and Zhang model were separately used to process nanoindentation data obtained in single grains. The error of Zhang model (i.e. about 20%) is obviously smaller than that of David model (i.e. about 70%). Averaging nanoindentation data in multiple grains at first, followed by processing averaged data using Zhang model, can accurately measure the stress in polycrystalline materials. Through comparison with pre-applied known stresses, the energy-based Zhang model demonstrates good applicability for materials with different hardening behaviors under various stress states.

源语言英语
页(从-至)1743-1752
页数10
期刊Journal of Materials Research and Technology
卷45
DOI
出版状态已出版 - 1 11月 2026

学术指纹

探究 'A novel method for measuring micro-regional residual stress by nanoindentation' 的科研主题。它们共同构成独一无二的学术指纹。

引用此