跳到主要导航 跳到搜索 跳到主要内容

热处理工艺对M390 / 304 闪光对焊焊接接头微观组织及力学性能的影

  • Hao Dong
  • , Lixue Qiao
  • , Rui Cao
  • , Caiqin Wang
  • , Hongyan Che
  • , Tiejun Wang
  • , Yingjie Yan
  • China Iron and Steel Research Institute Group
  • Engineering and Technology Research Center of Hot Isostatic Pressing
  • Lanzhou University of Technology

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

n order to improve the mechanical properties of M390 high carbon martensitic stainless steel and 304 austenitic stainless steel welded joints, especially the hardness of welded joints to meet the requirements of advanced knives production,different heat treatment processes of welded joints were performed for M390 high carbon martensitic stainless steel and 304 austenitic stainless steel joints obtained by flash butt welding. Tensile,Vickers microhardness tests and scanning electron microscopy (SEM)were used to characterize the mechanical properties and microstructure evolution of welded joints with different heat treatment processes,line scanning was used to investigate element diffusion in various heat treatment processes and the fracture mechanism of welder joints under different heat treatment processes was investigated. The research results show that the 1 150 ℃ air cooling heat treatment process can be used as the best heat treatment process for M390 / 304 welded joints,the tensile strength and elongation of the corresponding welded joints reach 494 MPa and 15. 7%,which increase by 2. 7% and 182% compared to as-welded,respectively. The greater degree of element diffusion in welded joint under 1 150 ℃ air cooling process,as well as the improved uniformity of chemical composition in weld metal,account for the significant increase in elongation. The fracture types are all brittle fractures under different heat treatment processes,but the fracture locations are not the same. The change in fracture location is caused by different diffusion degrees of C,Cr,Ni elements during different heat treatment processes,as well as differences in the size and morphology of carbides in weld metal,which result in different strengthening effects of the second phase in weld metal.

投稿的翻译标题Effect of Heat Treatment Process on Microstructure and Mechanical Properties of M390 / 304 Flash Butt Welding Welded Joints
源语言繁体中文
期刊论文编号22050290
期刊Cailiao Daobao/Materials Reports
卷37
期24
DOI
出版状态已出版 - 12月 2023
已对外发布是

关键词

  • M390 / 304 welded joint
  • flash butt welding
  • mechanical property
  • microstructure
  • quenching process

学术指纹

探究 '热处理工艺对M390 / 304 闪光对焊焊接接头微观组织及力学性能的影' 的科研主题。它们共同构成独一无二的学术指纹。

引用此