Skip to main navigation Skip to search Skip to main content

Ultrasonic micromixer for microfluidic systems

  • National Institute of Advanced Industrial Science and Technology

Research output: Contribution to conference › Paper › peer-review

24 Scopus citations

Abstract

This paper describes the design, fabrication and evaluation of an active micromixer. Mixing occurs directly from ultrasonic vibration. The intended use of the device was for integrated micro chemical synthesis systems or for micro total analysis systems. The pattern of inlets, outlet and mixing chamber were formed in glass. The whole flow path was encapsulated by anodic bonding of a Si wafer to the glass. A diaphragm (6 mm×6 mm×0.15 mm) was etched on the Si side for oscillation. The ultrasonic vibration originated from a bulk piezoelectric PZT ceramic (5 mm×4 mm×0.15 mm), which was excited by a 60 kHz square wave at 50 V (peak-to-peak). Liquids were mixed in a chamber (6 mm×6 mm×0.06 mm) with the Si oscillating diaphragm driven by the PZT. A solution of uranine and water were used to evaluate the mixing effectiveness. The entire process was recorded using a fluorescent microscope equipped with digital camera. The laminar flows of uranine solution (5 μl/min) and water (5 μl/min) were mixed effectively when the PZT was excited.

Original languageEnglish
Pages80-85
Number of pages6
StatePublished - 2000
Externally publishedYes
Event13th Annual International Conference on Micro Electro Mechanical Systems (MEMS 2000) - Miyazaki, Jpn
Duration: 23 Jan 2000 → 27 Jan 2000

Conference

Conference13th Annual International Conference on Micro Electro Mechanical Systems (MEMS 2000)
CityMiyazaki, Jpn
Period23/01/00 → 27/01/00

Fingerprint

Dive into the research topics of 'Ultrasonic micromixer for microfluidic systems'. Together they form a unique fingerprint.

Cite this