Three-band polarization converter based on reflective metasurface

Xiaobo Liu; Jingsi Zhang; Wei Li; Rui Lu; Lumei Li; Zhuo Xu; Anxue Zhang

doi:10.1109/LAWP.2016.2614686

Three-band polarization converter based on reflective metasurface

Xiaobo Liu
, Jingsi Zhang
, Wei Li
, Rui Lu
, Lumei Li
, Zhuo Xu
, Anxue Zhang

Faculty of Electronic and Information Engineering

Xi'an Jiaotong University

Research output: Contribution to journal › Article › peer-review

87 Scopus citations

Abstract

In this letter, a reflective metasurface composed of double-layer metallic L-patterns is designed. Both the simulated and measured results demonstrate that when the incident angle ranges from 0° to 30°, the metasurface can be regarded as a three-band polarization converter. On the one hand, the metasurface can convert TM (TE) polarized incident wave into right (left)-handed circularly polarized wave from 9.1 to 16.5 GHz as well as left (right)-handed circularly polarized wave from 20.0 to 25.4 GHz. On the other hand, the metasurface can realize cross-polarization conversion between TM and TE polarized waves from 17.4 to 18.9 GHz. In addition, the transmission model is expanded from monolayer reflective metasurface to multilayer reflective metasurface to explain the conversion mechanism whose theoretical results are highly consistent with the simulated and measured results.

Original language	English
Pages (from-to)	924-927
Number of pages	4
Journal	IEEE Antennas and Wireless Propagation Letters
Volume	16
DOIs	https://doi.org/10.1109/LAWP.2016.2614686
State	Published - 2017

Keywords

Polarization converter
reflective metasurface
transmission model

Access to Document

10.1109/LAWP.2016.2614686

Cite this

@article{ddae4a0e9ede4998b1ac7725eb74eee9,

title = "Three-band polarization converter based on reflective metasurface",

abstract = "In this letter, a reflective metasurface composed of double-layer metallic L-patterns is designed. Both the simulated and measured results demonstrate that when the incident angle ranges from 0° to 30°, the metasurface can be regarded as a three-band polarization converter. On the one hand, the metasurface can convert TM (TE) polarized incident wave into right (left)-handed circularly polarized wave from 9.1 to 16.5 GHz as well as left (right)-handed circularly polarized wave from 20.0 to 25.4 GHz. On the other hand, the metasurface can realize cross-polarization conversion between TM and TE polarized waves from 17.4 to 18.9 GHz. In addition, the transmission model is expanded from monolayer reflective metasurface to multilayer reflective metasurface to explain the conversion mechanism whose theoretical results are highly consistent with the simulated and measured results.",

keywords = "Polarization converter, reflective metasurface, transmission model",

author = "Xiaobo Liu and Jingsi Zhang and Wei Li and Rui Lu and Lumei Li and Zhuo Xu and Anxue Zhang",

note = "Publisher Copyright: {\textcopyright} 2002-2011 IEEE.",

year = "2017",

doi = "10.1109/LAWP.2016.2614686",

language = "英语",

volume = "16",

pages = "924--927",

journal = "IEEE Antennas and Wireless Propagation Letters",

issn = "1536-1225",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - JOUR

T1 - Three-band polarization converter based on reflective metasurface

AU - Liu, Xiaobo

AU - Zhang, Jingsi

AU - Li, Wei

AU - Lu, Rui

AU - Li, Lumei

AU - Xu, Zhuo

AU - Zhang, Anxue

PY - 2017

Y1 - 2017

N2 - In this letter, a reflective metasurface composed of double-layer metallic L-patterns is designed. Both the simulated and measured results demonstrate that when the incident angle ranges from 0° to 30°, the metasurface can be regarded as a three-band polarization converter. On the one hand, the metasurface can convert TM (TE) polarized incident wave into right (left)-handed circularly polarized wave from 9.1 to 16.5 GHz as well as left (right)-handed circularly polarized wave from 20.0 to 25.4 GHz. On the other hand, the metasurface can realize cross-polarization conversion between TM and TE polarized waves from 17.4 to 18.9 GHz. In addition, the transmission model is expanded from monolayer reflective metasurface to multilayer reflective metasurface to explain the conversion mechanism whose theoretical results are highly consistent with the simulated and measured results.

AB - In this letter, a reflective metasurface composed of double-layer metallic L-patterns is designed. Both the simulated and measured results demonstrate that when the incident angle ranges from 0° to 30°, the metasurface can be regarded as a three-band polarization converter. On the one hand, the metasurface can convert TM (TE) polarized incident wave into right (left)-handed circularly polarized wave from 9.1 to 16.5 GHz as well as left (right)-handed circularly polarized wave from 20.0 to 25.4 GHz. On the other hand, the metasurface can realize cross-polarization conversion between TM and TE polarized waves from 17.4 to 18.9 GHz. In addition, the transmission model is expanded from monolayer reflective metasurface to multilayer reflective metasurface to explain the conversion mechanism whose theoretical results are highly consistent with the simulated and measured results.

KW - Polarization converter

KW - reflective metasurface

KW - transmission model

UR - https://www.scopus.com/pages/publications/85027534560

U2 - 10.1109/LAWP.2016.2614686

DO - 10.1109/LAWP.2016.2614686

M3 - 文章

AN - SCOPUS:85027534560

SN - 1536-1225

VL - 16

SP - 924

EP - 927

JO - IEEE Antennas and Wireless Propagation Letters

JF - IEEE Antennas and Wireless Propagation Letters

ER -

Three-band polarization converter based on reflective metasurface

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this