Abstract
Leak rate calculation is the foundation of Leak-Before-Break (LBB) technology application in Pressurized Water Reactor (PWR). In the paper, a leak rate Mathcad calculation code with different critical flow mathematical assumptions was completed. The code calculation results were contrasted from the published experimental data. The compared results show that the code calculation results are coincident with experimental data. However, the theoretical results are greater than experimental data with different crack L/D, stagnation pressures and subcooled temperatures in case of ignoring friction effect. While the crack friction effect is considered, the calculated results are well in accordance with the experimental data. Also, the different pressure drops are obtained and studied with variations of important parameters in detail. It demonstrates that the friction effect is a significant factor and must be considered in the crack leak rate calculation. The Mathcad code can be used to calculate the crack leak rate and provide application foundation of LBB in PWR pipe system.
| Original language | English |
|---|---|
| Pages (from-to) | 133-140 |
| Number of pages | 8 |
| Journal | Applied Thermal Engineering |
| Volume | 62 |
| Issue number | 1 |
| DOIs | |
| State | Published - 2014 |
Keywords
- Friction effect
- Leak rate
- Mathcad
- PWR
- Two-phase critical flow
Fingerprint
Dive into the research topics of 'Research on the leak-rate characteristics of leak-before-break (LBB) in pressurized water reactor (PWR)'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver