Relationship between the interlamellar bonding and properties of plasma-sprayed y2O3-ZrO2 coatings

Y. Z. Xing; C. J. Li; C. X. Li; G. J. Yang

doi:10.1361/cp2009itsc0939

Relationship between the interlamellar bonding and properties of plasma-sprayed y₂O₃-ZrO₂ coatings

Y. Z. Xing
, C. J. Li
, C. X. Li
, G. J. Yang

School of Materials Science and Engineering

Xi'an Jiaotong University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

9 Scopus citations

Abstract

8YSZ (8molY₂O₃-ZrO₂) coatings were deposited under different substrate surface temperature from room temperature up to 1100°C during plasma spraying. The lamellar mean bonding ratio of YSZ coatings was estimated from the ionic conductivity of YSZ coatings. The mechanical properties of YSZ coatings including microhardness, elastic modulus and fracture toughness were measured through indentation approaches. It was found that the bonding ratio of YSZ coatings increases with the increase of the surface temperature. The elastic modulus of the YSZ coatings are increased by a factor over three as the surface temperature is increased from room temperature to about 1100°C. Moreover, Comparing the fracture toughness of 0.9±0.2 MPa m_1/2.for YSZ coating deposited at ambient temperature, the measurement yields a mean fracture toughness of 5.1±1.1 MPa m_1/2, for the YSZ deposited at a surface temperature of 1100°C, which is about 3-fold that of bulk materials. The results clearly revealed that the mechanical properties of plasma-sprayed ceramic coatings determined by the interlamellar bonding. With the significant increase of interlamellar interface bonding through controlling coating surface temperature the mechanical properties values are significantly increased.

Original language	English
Title of host publication	Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009
Pages	939-944
Number of pages	6
DOIs	https://doi.org/10.1361/cp2009itsc0939
State	Published - 2009
Event	Expanding Thermal Spray Performance to New Markets and Applications - 2009 International Thermal Spray Conference, ITSC 2009 - Las Vegas, NV, United States Duration: 4 May 2009 → 7 May 2009

Publication series

Name	Proceedings of the International Thermal Spray Conference

Conference

Conference	Expanding Thermal Spray Performance to New Markets and Applications - 2009 International Thermal Spray Conference, ITSC 2009
Country/Territory	United States
City	Las Vegas, NV
Period	4/05/09 → 7/05/09

Access to Document

10.1361/cp2009itsc0939

Cite this

Xing, Y. Z., Li, C. J., Li, C. X., & Yang, G. J. (2009). Relationship between the interlamellar bonding and properties of plasma-sprayed y₂O₃-ZrO₂ coatings. In Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009 (pp. 939-944). (Proceedings of the International Thermal Spray Conference). https://doi.org/10.1361/cp2009itsc0939

Xing, Y. Z. ; Li, C. J. ; Li, C. X. et al. / Relationship between the interlamellar bonding and properties of plasma-sprayed y₂O₃-ZrO₂ coatings. Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009. 2009. pp. 939-944 (Proceedings of the International Thermal Spray Conference).

@inproceedings{07eec5a971b344a9b6aa94255323c1fa,

title = "Relationship between the interlamellar bonding and properties of plasma-sprayed y2O3-ZrO2 coatings",

abstract = "8YSZ (8molY2O3-ZrO2) coatings were deposited under different substrate surface temperature from room temperature up to 1100°C during plasma spraying. The lamellar mean bonding ratio of YSZ coatings was estimated from the ionic conductivity of YSZ coatings. The mechanical properties of YSZ coatings including microhardness, elastic modulus and fracture toughness were measured through indentation approaches. It was found that the bonding ratio of YSZ coatings increases with the increase of the surface temperature. The elastic modulus of the YSZ coatings are increased by a factor over three as the surface temperature is increased from room temperature to about 1100°C. Moreover, Comparing the fracture toughness of 0.9±0.2 MPa m1/2.for YSZ coating deposited at ambient temperature, the measurement yields a mean fracture toughness of 5.1±1.1 MPa m1/2, for the YSZ deposited at a surface temperature of 1100°C, which is about 3-fold that of bulk materials. The results clearly revealed that the mechanical properties of plasma-sprayed ceramic coatings determined by the interlamellar bonding. With the significant increase of interlamellar interface bonding through controlling coating surface temperature the mechanical properties values are significantly increased.",

author = "Xing, \{Y. Z.\} and Li, \{C. J.\} and Li, \{C. X.\} and Yang, \{G. J.\}",

year = "2009",

doi = "10.1361/cp2009itsc0939",

language = "英语",

isbn = "9781615030040",

series = "Proceedings of the International Thermal Spray Conference",

pages = "939--944",

booktitle = "Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009",

note = "Expanding Thermal Spray Performance to New Markets and Applications - 2009 International Thermal Spray Conference, ITSC 2009 ; Conference date: 04-05-2009 Through 07-05-2009",

}

Xing, YZ, Li, CJ , Li, CX & Yang, GJ 2009, Relationship between the interlamellar bonding and properties of plasma-sprayed y₂O₃-ZrO₂ coatings. in Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009. Proceedings of the International Thermal Spray Conference, pp. 939-944, Expanding Thermal Spray Performance to New Markets and Applications - 2009 International Thermal Spray Conference, ITSC 2009, Las Vegas, NV, United States, 4/05/09. https://doi.org/10.1361/cp2009itsc0939

Relationship between the interlamellar bonding and properties of plasma-sprayed y₂O₃-ZrO₂ coatings. / Xing, Y. Z.; Li, C. J.; Li, C. X. et al.
Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009. 2009. p. 939-944 (Proceedings of the International Thermal Spray Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Relationship between the interlamellar bonding and properties of plasma-sprayed y2O3-ZrO2 coatings

AU - Xing, Y. Z.

AU - Li, C. J.

AU - Li, C. X.

AU - Yang, G. J.

PY - 2009

Y1 - 2009

N2 - 8YSZ (8molY2O3-ZrO2) coatings were deposited under different substrate surface temperature from room temperature up to 1100°C during plasma spraying. The lamellar mean bonding ratio of YSZ coatings was estimated from the ionic conductivity of YSZ coatings. The mechanical properties of YSZ coatings including microhardness, elastic modulus and fracture toughness were measured through indentation approaches. It was found that the bonding ratio of YSZ coatings increases with the increase of the surface temperature. The elastic modulus of the YSZ coatings are increased by a factor over three as the surface temperature is increased from room temperature to about 1100°C. Moreover, Comparing the fracture toughness of 0.9±0.2 MPa m1/2.for YSZ coating deposited at ambient temperature, the measurement yields a mean fracture toughness of 5.1±1.1 MPa m1/2, for the YSZ deposited at a surface temperature of 1100°C, which is about 3-fold that of bulk materials. The results clearly revealed that the mechanical properties of plasma-sprayed ceramic coatings determined by the interlamellar bonding. With the significant increase of interlamellar interface bonding through controlling coating surface temperature the mechanical properties values are significantly increased.

AB - 8YSZ (8molY2O3-ZrO2) coatings were deposited under different substrate surface temperature from room temperature up to 1100°C during plasma spraying. The lamellar mean bonding ratio of YSZ coatings was estimated from the ionic conductivity of YSZ coatings. The mechanical properties of YSZ coatings including microhardness, elastic modulus and fracture toughness were measured through indentation approaches. It was found that the bonding ratio of YSZ coatings increases with the increase of the surface temperature. The elastic modulus of the YSZ coatings are increased by a factor over three as the surface temperature is increased from room temperature to about 1100°C. Moreover, Comparing the fracture toughness of 0.9±0.2 MPa m1/2.for YSZ coating deposited at ambient temperature, the measurement yields a mean fracture toughness of 5.1±1.1 MPa m1/2, for the YSZ deposited at a surface temperature of 1100°C, which is about 3-fold that of bulk materials. The results clearly revealed that the mechanical properties of plasma-sprayed ceramic coatings determined by the interlamellar bonding. With the significant increase of interlamellar interface bonding through controlling coating surface temperature the mechanical properties values are significantly increased.

UR - https://www.scopus.com/pages/publications/76749121944

U2 - 10.1361/cp2009itsc0939

DO - 10.1361/cp2009itsc0939

M3 - 会议稿件

AN - SCOPUS:76749121944

SN - 9781615030040

T3 - Proceedings of the International Thermal Spray Conference

SP - 939

EP - 944

BT - Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009

T2 - Expanding Thermal Spray Performance to New Markets and Applications - 2009 International Thermal Spray Conference, ITSC 2009

Y2 - 4 May 2009 through 7 May 2009

ER -

Xing YZ, Li CJ , Li CX , Yang GJ. Relationship between the interlamellar bonding and properties of plasma-sprayed y₂O₃-ZrO₂ coatings. In Expanding Thermal Spray Performance to New Markets and Applications - Proceedings of the 2009 International Thermal Spray Conference, ITSC 2009. 2009. p. 939-944. (Proceedings of the International Thermal Spray Conference). doi: 10.1361/cp2009itsc0939