Skip to main navigation Skip to search Skip to main content

Preparation and characterisation of porous lithium titanate thin film by magnetron sputtering

  • Z. Z. Yu
  • , H. R. Xu
  • , G. S. Zhu
  • , A. B. Yu
  • University of Electronic Science and Technology of China
  • Guilin University of Electronic Technology

Research output: Contribution to journal › Article › peer-review

Abstract

This work introduces a facile solution method for preparation of porous Li4Ti5O12 (LTO) thin film electrode for lithium-ion batteries (LIBs). The porous LTO films were prepared by magnetron sputtering deposition using cubic spinel LTO powder target as a sputtering source. The microstructure and morphology of the LTO thin films annealed in air (LTO-air) was porous structured thin film. The LTO-air thin film electrode showed the excellent electrochemical performance. The capacity of LTO-air up to 81 μAh cm-2μm was at 10 μA cm-2, and capacity retention was 99% after 100 cycles at 10 μA cm-2. The porous structure features of thin film likely contributed to the good electrochemical performance of the LTO-air thin film. This research suggests that LTO thin films have the potential for the high energy storage electrode material for LIBs.

Original languageEnglish
Pages (from-to)S9302-S9305
JournalMaterials Research Innovations
Volume19
DOIs
StatePublished - Nov 2015

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Anode material
  • Lithium titanate thin film
  • Porous structure
  • Powder target
  • Radio frequency magnetron sputtering

Fingerprint

Dive into the research topics of 'Preparation and characterisation of porous lithium titanate thin film by magnetron sputtering'. Together they form a unique fingerprint.

Cite this