Skip to main navigation Skip to search Skip to main content

Optimisation of forming process for highly drapeable fabrics

  • Shuai Chen
  • , Lee T. Harper
  • , Andreas Endruweit
  • , Nicholas A. Warrior
  • University of Nottingham

Research output: Contribution to conference › Paper › peer-review

8 Scopus citations

Abstract

A genetic algorithm is coupled with a finite element model to optimise the arrangement of constraints for a composite press-forming problem. A series of springs are used to locally apply in-plane tension through clamps to the fibre preform to control material draw-in. The optimisation procedure seeks to minimise local in-plane shear angles by determining the optimum location and size of constraining clamps, and the stiffness of connected springs. Results are presented for a double-dome geometry, which are compared against data from the literature using alternative means to apply constraints. Controlling material draw-in using in-plane constraints around the blank perimeter is an effective way of homogenising the shear angle distribution and minimising the maximum shear angle. However, an alternative set-up with a segmented blank holder has the potential to produce fewer wrinkles in the fabric due to lower peak compressive strains along the fibre directions.

Original languageEnglish
StatePublished - 2015
Externally publishedYes
Event20th International Conference on Composite Materials, ICCM 2015 - Copenhagen, Denmark
Duration: 19 Jul 2015 → 24 Jul 2015

Conference

Conference20th International Conference on Composite Materials, ICCM 2015
Country/TerritoryDenmark
CityCopenhagen
Period19/07/15 → 24/07/15

Keywords

  • Fabrics/textiles
  • Finite element analysis
  • Forming
  • Optimisation

Fingerprint

Dive into the research topics of 'Optimisation of forming process for highly drapeable fabrics'. Together they form a unique fingerprint.

Cite this