Optimal Thermal Energy Storage Configuration Model for CSP Units

Chenjia Feng; Chengcheng Shao; Shen Zhang

doi:10.1109/EEEIC.2019.8783343

Optimal Thermal Energy Storage Configuration Model for CSP Units

Chenjia Feng
, Chengcheng Shao
, Shen Zhang

School of Electrical Engineering

Xi'an Jiaotong University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Concentrating solar power (CSP) generation provides a new way to exploit solar energy. Its thermal energy storage (TES) can improve the output flexibility of CSP greatly and mitigate the peak load regulation problem brought by renewable energy. The proper configuration of TES capacity can promote the efficient utilization of CSP resource as well as lower the general cost. This paper proposes a TES capacity configuration model which can work out an optimal configuration scheme of TES capacity as well as generation schedule. It can reflect the actual role TES plays in electricity transfer and takes the influence of different load scales and illumination conditions into consideration which ensures its optimality and generality over a relatively long time scale. The case studies proved the effectiveness and correctness of the proposed method. It can provide an effective tool for TES capacity configuration of CSP units as well as generation expansion of systems containing CSP.

Original language	English
Title of host publication	Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781728106526
DOIs	https://doi.org/10.1109/EEEIC.2019.8783343
State	Published - Jun 2019
Event	19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019 - Genoa, Italy Duration: 11 Jun 2019 → 14 Jun 2019

Publication series

Name	Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

Conference

Conference	19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019
Country/Territory	Italy
City	Genoa
Period	11/06/19 → 14/06/19

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

CSP
TES capacity configuration
electricity transfer
optimality and generality
peak load regulation

Access to Document

10.1109/EEEIC.2019.8783343

Cite this

Feng, C., Shao, C., & Zhang, S. (2019). Optimal Thermal Energy Storage Configuration Model for CSP Units. In Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019 Article 8783343 (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EEEIC.2019.8783343

Feng, Chenjia ; Shao, Chengcheng ; Zhang, Shen. / Optimal Thermal Energy Storage Configuration Model for CSP Units. Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019. Institute of Electrical and Electronics Engineers Inc., 2019. (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019).

@inproceedings{504e3c68606b42759c5030109d85487b,

title = "Optimal Thermal Energy Storage Configuration Model for CSP Units",

abstract = "Concentrating solar power (CSP) generation provides a new way to exploit solar energy. Its thermal energy storage (TES) can improve the output flexibility of CSP greatly and mitigate the peak load regulation problem brought by renewable energy. The proper configuration of TES capacity can promote the efficient utilization of CSP resource as well as lower the general cost. This paper proposes a TES capacity configuration model which can work out an optimal configuration scheme of TES capacity as well as generation schedule. It can reflect the actual role TES plays in electricity transfer and takes the influence of different load scales and illumination conditions into consideration which ensures its optimality and generality over a relatively long time scale. The case studies proved the effectiveness and correctness of the proposed method. It can provide an effective tool for TES capacity configuration of CSP units as well as generation expansion of systems containing CSP.",

keywords = "CSP, TES capacity configuration, electricity transfer, optimality and generality, peak load regulation",

author = "Chenjia Feng and Chengcheng Shao and Shen Zhang",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019 ; Conference date: 11-06-2019 Through 14-06-2019",

year = "2019",

month = jun,

doi = "10.1109/EEEIC.2019.8783343",

language = "英语",

series = "Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019",

}

Feng, C, Shao, C & Zhang, S 2019, Optimal Thermal Energy Storage Configuration Model for CSP Units. in Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019., 8783343, Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019, Institute of Electrical and Electronics Engineers Inc., 19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019, Genoa, Italy, 11/06/19. https://doi.org/10.1109/EEEIC.2019.8783343

Optimal Thermal Energy Storage Configuration Model for CSP Units. / Feng, Chenjia; Shao, Chengcheng; Zhang, Shen.
Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 8783343 (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Optimal Thermal Energy Storage Configuration Model for CSP Units

AU - Feng, Chenjia

AU - Shao, Chengcheng

AU - Zhang, Shen

PY - 2019/6

Y1 - 2019/6

N2 - Concentrating solar power (CSP) generation provides a new way to exploit solar energy. Its thermal energy storage (TES) can improve the output flexibility of CSP greatly and mitigate the peak load regulation problem brought by renewable energy. The proper configuration of TES capacity can promote the efficient utilization of CSP resource as well as lower the general cost. This paper proposes a TES capacity configuration model which can work out an optimal configuration scheme of TES capacity as well as generation schedule. It can reflect the actual role TES plays in electricity transfer and takes the influence of different load scales and illumination conditions into consideration which ensures its optimality and generality over a relatively long time scale. The case studies proved the effectiveness and correctness of the proposed method. It can provide an effective tool for TES capacity configuration of CSP units as well as generation expansion of systems containing CSP.

AB - Concentrating solar power (CSP) generation provides a new way to exploit solar energy. Its thermal energy storage (TES) can improve the output flexibility of CSP greatly and mitigate the peak load regulation problem brought by renewable energy. The proper configuration of TES capacity can promote the efficient utilization of CSP resource as well as lower the general cost. This paper proposes a TES capacity configuration model which can work out an optimal configuration scheme of TES capacity as well as generation schedule. It can reflect the actual role TES plays in electricity transfer and takes the influence of different load scales and illumination conditions into consideration which ensures its optimality and generality over a relatively long time scale. The case studies proved the effectiveness and correctness of the proposed method. It can provide an effective tool for TES capacity configuration of CSP units as well as generation expansion of systems containing CSP.

KW - CSP

KW - TES capacity configuration

KW - electricity transfer

KW - optimality and generality

KW - peak load regulation

UR - https://www.scopus.com/pages/publications/85070827760

U2 - 10.1109/EEEIC.2019.8783343

DO - 10.1109/EEEIC.2019.8783343

M3 - 会议稿件

AN - SCOPUS:85070827760

T3 - Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

BT - Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

Y2 - 11 June 2019 through 14 June 2019

ER -

Feng C, Shao C, Zhang S. Optimal Thermal Energy Storage Configuration Model for CSP Units. In Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 8783343. (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019). doi: 10.1109/EEEIC.2019.8783343

Optimal Thermal Energy Storage Configuration Model for CSP Units

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this