TY - GEN
T1 - Non-Contact Full-Field Bearing Condition Monitoring and Fault Diagnosis Using Millimeter-Wave Radar
AU - Wang, Zhongxing
AU - Tian, Fengshuo
AU - Wang, Rong
AU - Lu, Haoyuan
AU - Zhang, Liuyang
N1 - Publisher Copyright:
© 2024 IEEE.
PY - 2024
Y1 - 2024
N2 - As one of the most critical components of rotating machinery, the bearings are prone to failure and directly affect the stable operation of mechanical equipment. Therefore, accurate state monitoring and fault diagnosis of rolling bearings have always been an important concern to the community. Since the vibration signals of mechanical equipment are propagated between different components, in order to comprehensively monitor the operating status of the machine and accurately locate the faults, it is necessary to simultaneously obtain vibration signal from multiple bearing measurement points. Existing vibration monitoring methods inevitably have the problems of cumbersome arrangement and high cost when facing the demand of multi-point monitoring. Here proposes a full-field bearing condition monitoring and fault diagnosis method based on millimeter-wave radar, which can give full play to the advantages of millimeter-wave radar's large field of view, multi-channel, and low cost. Based on commercial millimeter-wave radar modules, we developed a method for full-field target localization, isolation and extraction of signals of interest and phase information enhancement. We synchronously collected vibration information from multiple measurement points in the radar field of view in the validation experiments, further analyzed the bearing vibration signals, and successfully obtained a sub micron-level impulse sequence generated by a localized failure of outer ring. The work provides a potential novel method for multipoint condition monitoring and fault diagnosis of mechanical machine.
AB - As one of the most critical components of rotating machinery, the bearings are prone to failure and directly affect the stable operation of mechanical equipment. Therefore, accurate state monitoring and fault diagnosis of rolling bearings have always been an important concern to the community. Since the vibration signals of mechanical equipment are propagated between different components, in order to comprehensively monitor the operating status of the machine and accurately locate the faults, it is necessary to simultaneously obtain vibration signal from multiple bearing measurement points. Existing vibration monitoring methods inevitably have the problems of cumbersome arrangement and high cost when facing the demand of multi-point monitoring. Here proposes a full-field bearing condition monitoring and fault diagnosis method based on millimeter-wave radar, which can give full play to the advantages of millimeter-wave radar's large field of view, multi-channel, and low cost. Based on commercial millimeter-wave radar modules, we developed a method for full-field target localization, isolation and extraction of signals of interest and phase information enhancement. We synchronously collected vibration information from multiple measurement points in the radar field of view in the validation experiments, further analyzed the bearing vibration signals, and successfully obtained a sub micron-level impulse sequence generated by a localized failure of outer ring. The work provides a potential novel method for multipoint condition monitoring and fault diagnosis of mechanical machine.
KW - MIMO FMCW radar
KW - fault diagnosis
KW - full-field measurement
KW - mm Wave sensing
KW - vibration signal
UR - https://www.scopus.com/pages/publications/85197751317
U2 - 10.1109/I2MTC60896.2024.10561159
DO - 10.1109/I2MTC60896.2024.10561159
M3 - 会议稿件
AN - SCOPUS:85197751317
T3 - Conference Record - IEEE Instrumentation and Measurement Technology Conference
BT - I2MTC 2024 - Instrumentation and Measurement Technology Conference
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2024 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2024
Y2 - 20 May 2024 through 23 May 2024
ER -