Skip to main navigation Skip to search Skip to main content

Near-surface wind profile test based on accuracy verification of UAV anemometer lifting height in an urban fringe built-up area

  • Huazhong University of Science and Technology
  • Hubei Engineering and Technology Research Center of Urbanization
  • Ministry of Natural Resources of the People's Republic of China
  • Xi'an Jiaotong University

Research output: Contribution to journalArticlepeer-review

1 Scopus citations

Abstract

Multirotor UAVs (unmanned aerial vehicles) have been widely used in urban vertical wind environment testing, whereas less attention has been given to the accuracy of wind speed captured by anemometers as drones fly. This paper aims to identify the ideal location of the anemometer on the UAV to obtain more accurate wind speeds and to assess the variation characteristics of wind speed in different spatial types in urban fringe areas. Accuracy verification of the lifting height of the anemometer in the UAV and wind profile test was carried out at three locations (a tennis court, a residential area, and a green park) on the iHarbour campus of Xi’an Jiaotong University. The following results were obtained: (1) the background wind speed was captured more accurately (R = 0.727, P = 0.001) when the lifting height of the anemometer was 0.00 m (as the height of the anemometer was the same as the rotors) and when the multirotor UAV was hovering in the air. However, this optimal lifting height lost 29.6% of the accuracy for capturing the background wind speed. Interestingly, when the lifting height was 0.75 m, the anemometer captured by the anemometer on the drone showed a significant negative correlation (R = − 0.682, P = 0.005) with the background wind speed. (2) The wind speed at an altitude of 1.5 m in the residential area was significantly lower than that noted at other heights, and the wind speed at 24 m was significantly lower than that at 100 m. (3) In addition, a sudden increase in wind speeds was always observed near the surface of 12 m inside the campus, which may be due to the interaction of hot surface air in this newly built-up area with the cool rural winds around it. The study presents methods and quantitative references for the application of multirotor UAVs in urban vertical wind environment testing and the evaluation of ventilation performance at different heights inside high-rise houses in urban fringe areas.

Original languageEnglish
Pages (from-to)81468-81480
Number of pages13
JournalEnvironmental Science and Pollution Research
Volume29
Issue number54
DOIs
StatePublished - Nov 2022

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 11 - Sustainable Cities and Communities
    SDG 11 Sustainable Cities and Communities

Keywords

  • Anemometer lifting height
  • Multirotor UAV
  • Urban fringe area
  • Wind profile

Fingerprint

Dive into the research topics of 'Near-surface wind profile test based on accuracy verification of UAV anemometer lifting height in an urban fringe built-up area'. Together they form a unique fingerprint.

Cite this