Abstract
With the miniaturization of quantum sensors, the fabrication of alkali metal vapor cells based on micro-electromechanical systems (MEMS) has become increasingly important. However, the fabrication of MEMS vapor cells remains a challenge. In this study, a microfabricated millimeter-level vapor cell was fabricated and tested. The silicon cavity was fabricated by dry etching and chemical polishing. After injection of alkali metal and buffer gas, a two-step low-temperature anodic bonding was employed. The first step was non-isothermal to keep the alkali metal in the low-temperature pole plate and the second step was isothermal to improve the bonding strength, enhancing the hermeticity. Then, the vapor cell was tested for sidewall roughness, bonding strength, and leakage rate. Subsequently, Rb D1 line absorption spectroscopy, stability, and the single-beam magnetometer signal were tested. The results show the fabricated vapor cell had high stability, providing a basis for the miniaturization of quantum devices.
| Original language | English |
|---|---|
| Article number | 115744 |
| Journal | Measurement: Journal of the International Measurement Confederation |
| Volume | 241 |
| DOIs | |
| State | Published - 1 Feb 2025 |
Keywords
- Atomic magnetometer
- Chemical polishing
- MEMS alkali metal vapor cell
- Two-step low-temperature anodic bonding
Fingerprint
Dive into the research topics of 'Microfabricated vapor cells with chemical polishing and two-step low-temperature anodic bonding for single-beam magnetometer'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver